Table of Contents
Advertisement
32
REVIEW
RECH. SEQ.
MULTI-FONCTIONS
q
2
1
2
3
4
5
6
7
8
9
0
4
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1
Press MULTI-FONCTIONS
1" or "£ 1" is displayed on screen, "1" or "-1" on the
display panel and search begins in the corresponding
direction.
To access index codes 2 through 9, press MULTI-
FONCTIONS
or
number is displayed.
Ex.: To locate the beginning of B from the current
position, press MULTI-FONCTIONS
To locate the beginning of D from the current
position, press MULTI-FONCTIONS
A
–2
When the specified index code is located, playback
begins automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
ACTIVATE INSTANT
REVIEW
1
Press REVIEW. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
The front display panel tells you how many programmes
have been recorded. If you have, for example, 3
programmes, "REVIEW" and "3" appear and blink. To
watch the first of the 3 programmes, press REVIEW three
times. The recorder searches and begins playback
automatically. You can access a programme as far as 9
index codes away from the current tape position.
NOTES:
Instant ReView is not possible while the recorder is in the
Timer mode.
The HR-J449MS has the REVIEW button on the recorder as well.
PLAYBACK (cont.)
or
(™ or £). "™
repeatedly until the correct index
once.
Current position
B
C
D
E
F
–1
1
2
3
Index number
£ 2
twice.
Advertisement
Table of Contents
