Picture System - JVC HR-J449MS Instructions Manual

36
B.E.S.T.

Picture System

Turn on the TV and select the AV mode.
MENU
Display Panel Indication
HR-J746MS
HR-J449MS
As the tape check progresses, the "—" marks on the display
panel increase upward. Once the "BEST" indicator starts
blinking, the check is complete.
q
0
OK
RECORDING (cont.)
The B.E.S.T. (Biconditional Equalised Signal Tracking) system
checks the condition of the tape in use during recording and
playback, and compensates to provide the highest-possible
recording and playback pictures. The default setting for both
recording and playback is "M.".
Recording
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
The recorder power comes on automatically.
ACCESS MENU PRINCIPAL
SCREEN
2
Press MENU twice.
ACCESS AUTRES
REGLAGES SCREEN
3
Move the highlight bar
(pointer) to "AUTRES
REGLAGES" by pressing
MULTI-FONCTIONS %fi,
then press OK.
CONFIRM B.E.S.T. STATUS
4
The default setting is "M.".
If this is the case, go to
step 5. If not, press MULTI-
FONCTIONS fi to move
the highlight bar (pointer)
to "B.E.S.T.", then press
MULTI-FONCTIONS
set to "M.".
RETURN TO NORMAL
SCREEN
5
Press MENU.
START RECORDING
6
Press and hold q and 4 on the remote, or q on the
recorder.
The recorder spends approximately 7 seconds
assessing the condition of the tape, then begins
recording.
When the "BEST" indicator begins blinking, that
means adjustment is complete.
Pressing the recorder's q button while "BEST" is
displayed does not start Instant Timer Recording
( pg. 41).
MENU PRINCIPAL
AUTRES REGLAGES
REGL. AUTO. DES CANAUX
REGL. MANUEL CANAUX
REGL. DES NUMEROS GUIDE
REGLAGE DE L'HORLOGE
[5 ∞ ] =
[MENU] : SORTIE
AUTRES REGLAGES
ENR. PROG. AUTO : M.
O.S.D. : M.
B.E.S.T. : M.
SELECTION AV2 : AUX.
to
[5 ∞ ] = [ ] : M./A.
[MENU] : SORTIE