Panasonic SA-PT950P Service Manual page 49

9.5.5. XM Satellite Radio Code Table
Error Code Diagnosis Contents
XM XM Radio Selection
RADIO
ANTENNA XM connectivity
UPDATING XM Encryption Code 1) The XM antenna is being updated
NO SIGNL XM Signal receptivity The XM Signal is too weak.
XM Channel
OFF AIR
Broadcasting
XM --- XM Channel
Broadcasting
XM ERROR XM Module
Abnormality
Special Note: XM Satellite Radio ID is necessary for the activation of the XM Satellite Radio.
Description of Contents
It takes a short time for the XM radio to
power up after selecting the sourceon
the main unit. During this time, the
FL display shows the message.Wait
for a few seconds for the process to
completeIf not, check on the XM
antenna if it is connected or damaged.
The XM antenna is not properly
connected or the antenna cable is
damaged.
with the latest encryption code.
(Wait for few seconds for the updating
to be completed.)
2) The selected XM channel has been
blocked, or isno longer available with
the subscription package.
Re-oriented the XM antenna for better
reception.
The selected XM channel is not
currently broadcasting information.
The selected XM channel is not
available. Selection of a different
channel.
The XM radio module is performing
abnormally. Turn the main unit off and
power on. The XM antenna may be
defective.
49
Automatic FL Display
(Flashing)
For more information,
refer to operating
instruction manual
(Flashing) for connection of
antenna.
(Flashing)
For more information,
refer to operating
instruction manual
(Flashing) for optimizing the
signal reception.
For more information,
refer to operating
instruction manual
(Flashing) for selection of the
channels.
For more information,
refer to operating
instruction manual
(Flashing) for selection of the
channels.
(Flashing)
SA-PT950P / SA-PT950PC
Remarks