Check, Cancel And Change Programmes - JVC HR-272EU Instructions Manual

28
EN

Check, cancel and change programmes

A
Disengage the timer mode.
#
Press (TIMER), then press
B
Access the Programme Check screen/display.
"
Press .
1
.
TIMER RECORDING (cont.)
C
Access the Programme screen/display.
"
Press again to check
more information. Each time
"
you press , the next
programme's information
appears.
The front display panel shows the programme start time. Pressing
OK changes the display to the programme stop time, then the
date and the channel position.
To cancel or change a programme...
D
Cancel or change a programme.
&
Press to cancel a programme. To change programme
settings, press the appropriate button: START+/–,
STOP+/–, DATE+/–, PR+/–, VPS/PDC and/or SP/LP
p
( ).
You can change "TV PROG" to "SAT" for the channel position
by pressing the NUMBER key "0".
E
Return to the normal screen/display.
"
Press as many times as necessary. If there are still
some programmes remaining, go on to step 6.
F
Return to the timer mode.
#
Press (TIMER).
NOTE:
You can also check the programmes on the front display panel
even if the recorder's power is off (unless the recorder is in the
Power Save mode pg. 38) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.