Home Leave Operation - Daikin SiENBE07-618_C Service Manual

Operation Manual
2.5

HOME LEAVE Operation

HOME LEAVE operation is a function which allows you to record
your preferred temperature and air flow rate settings.
„ To start HOME LEAVE operation
1. Press "HOME LEAVE button".
„ To cancel HOME LEAVE operation
2. Press "HOME LEAVE button" again.
Before using HOME LEAVE operation
„ To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air flow rate for HOME
LEAVE operation. Record your preferred temperature and air flow rate.
Cooling
Heating
1. Press "HOME LEAVE button". Make sure "
2. Adjust the set temperature with "
3. Adjust the air flow rate with "FAN" setting button as you like.
Home leave operation will run with these settings the next time you use the unit. To change the recorded
information, repeat steps 1 – 3.
50
• " " is displayed on the LCD.
• The HOME LEAVE lamp lights up.
• The HOME LEAVE lamp goes off.
• " " disappears from the LCD.
Initial setting
temperature Air flow rate
25° AUTO
25° AUTO
" or "
Selectable range
temperature
18-32°C
10-30°C
" is displayed in the remote control display.
" as you like.
SiENBE07-618_C
1, 2
Air flow rate
5 step, AUTO and QUIET
5 step, AUTO and QUIET
System Configuration