Panasonic WV-CP310/G Installation Manual page 9

[Precautions for use]
This product is designed to be used indoors.
This product is not operable outdoors.
This product has no power switch.
When turning off the power, turn off a circuit
breaker.
To keep on using with stable performance
Parts of this product may deteriorate and it
may shorten the lifetime of this product when
using in locations subject to high temperatures
and high humidity. (Recommended operating
temperature: +35 °C or lower)
Do not expose this product to direct heat
sources such as a heater.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to this product.
Failure to observe this may cause trouble.
Noise on monitor
T his product is e quippe d wi th a supe r
sensitive CCD. Therefore, noise may appear
on the monitor. This phenomenon is not
trouble.
Discoloration on the CCD color filter
When continuously shooting a bright light
source such as a spotlight, the color filter of
the CCD may have deteriorated and it may
cause discoloration. Even when changing the
fixed shooting direction after continuously
shooting a spotlight for a certain period, the
discoloration may remain.
Do not aim this product at strong light
sources.
A light source such as a spot light causes a
blooming (light bleeding) or a smear (vertical
lines).
Smear
Blooming
Cleaning this product body
Tu r n th e p owe r of f wh e n c l e a ni ng thi s
product. Do not use strong abrasive detergent
when cleaning this product. Otherwise, it may
cause discoloration.
Synchronous mode setting
Image synchronous mode of this camera
indicates internal synchronization (INT) only.
Set the multiplexed vertical drive (VD2) as OFF
when the camera is connected to the system
controller of the company.
Bright subject
9