Panasonic WV-CP310/G Installation Manual page 15

4
Installation of camera mount bracket (locally procured)
Secure the camera mount bracket (locally procured) to the installation position, and mount the
camera on the camera mount bracket.
Prepare mounting screws according to the material of the area where the camera mount
bracket (locally procured) is to be installed. The installation method may be different depending
on the material of the area where the bracket is to be installed.
• When installing on steel: Fix with bolts and nuts (M6 or M8).
• When installing on concrete: Fix with expansion anchor bolts (M6 or M8).
• Use mount bracket with strength 5 times of the total weight of the camera body and lens.
• The height and length of the camera mount bracket must be appropriate to ensure the use
of the safety wire in the accessories.
The mounting conditions of the camera mount bracket (locally procured) are described as
follows:
Installation
place
On ceiling
On wall
Important:
• Refer to the operating instructions of the camera mount bracket (locally procured) for the
mounting angle of the camera mount bracket for a ceiling or wall.
• When the camera mount bracket is mounted on a wall, be sure to observe the mounting height
described on the illustration.
<Installation sample on a ceiling>
Screws
(locally procured)
Recommended
screw
M6 or M8
M8
Camera mount
bracket (locally
procured)
Screws
(locally procured)
Number of screw
3 pcs.
4 pcs.
<Installation sample on a wall>
Minimum pull-out
strength (per 1 pc.)
196 N
921 N
More than
270 cm
Floor
15