Disa Intercept Routing—No Dial; Outgoing Message (Ogm) - Panasonic KX-TDE100 Feature Manual

Continued from previous page
Intercept Routing
No
(Busy Tone /
DND Tone
Continuation
time expires)
The call is disconnected.
The call is routed to
the intercept destination.
(Intercept Routing DND)
G
DISA Intercept Routing—No Dial
If the caller fails to dial any digits within a preprogrammed time period (DISA 1st Dial Time for Intercept) after
hearing the outgoing message (OGM), one of the following can be selected through system programming:
a.
Disable: The call will be terminated.
b.
Operator: The call will be redirected to the operator.
c.
AA-0, AA-9: The call will be redirected to the destination assigned to that AA number.
® 4.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—
® [211] DISA Intercept Time
® 7.3 [5-3-1] Voice Message—DISA System—Option 1—
DISA answers
DISA Built-in Automated Attendant Number (DISA AA Service)
After listening to the outgoing message (OGM), the caller may dial a single digit (DISA AA number). The
destination for each DISA AA number can be assigned for each message. It is also possible to assign other
DISA floating extension numbers as the destination (Multistep DISA AA Service).
If the caller dials a second digit within a preprogrammed time period (DISA 2nd Dial Time for AA), the DISA
AA service is not employed.
7.4 [5-3-2] Voice Message—DISA Message—
4.5 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—

Outgoing Message (OGM)

When a call arrives on a DISA line, a prerecorded DISA message will greet and guide the caller.
Any extension assigned as the manager can record outgoing messages (OGMs). (® 12.1.2 OGM (Outgoing
Message))
[Programming Example]
Document Version 2009-12
What method is assigned
for DISA Intercept
Routing DND?
Busy tone
Does the caller
press while hearing a busy
tone (Call Retry)?
Yes
The message for
the DND mode is
sent to the caller.
A
4.1.8 DISA (Direct Inward System Access)
Continued from previous page
Is an Intercept
Routing Busy destination
assigned?
OGM
No
Is a DISA Busy
Message assigned?
Yes
The message for
busy is sent to the
caller.
F
The call is disconnected.
DISA—No Dial Intercept Timer
DISA Intercept—Intercept when No Dial after
1 Digit AA Destination (Extension Number)—Dial 0–9
DISA—2nd Dial Timer for AA
Yes
The call is routed to
the intercept destination.
(Intercept Routing Busy)
No
G
Busy tone
F
Does the caller
No
press while hearing a busy
(Busy Tone / tone (Call Retry)?
DND Tone
Continuation
time expires) Yes
A
Feature Manual 77