→
Parameter Selection (for Call Park)
→
Optional Parameter (Ringing Tone Type Number) (for Call Park)
6.13 [4-2-3] Portable Station—Flexible Button
→
Type
→
Parameter Selection (for Call Park)
→
Optional Parameter (or Ringing Tone Type Number) (for Call Park)
6.17 [4-3] DSS Console
→
Type
→
Parameter Selection (for Call Park)
→
Optional Parameter (Ringing Tone Type Number) (for Call Park)
Feature Manual References
6.1.3 Flexible Buttons
21.1 Capacity of System Resources
Operating Manual References
1.3.6 Call Hold
3.1.8 Call Pickup
Description
An extension user can answer a call ringing at any other extension.
The following types of Call Pickup are available:
Type
Directed
Group
Call Pickup Deny
An extension user can prevent other extensions from picking up calls ringing at his or her own extension.
Conditions
•
Call Pickup applies to:
Intercom, CO line, and doorphone calls
•
Internal Call Block
An extension which cannot call certain extensions based on Class of Service (COS) programming (®
9.1.14 Internal Call Block) also cannot pick up calls ringing at those extensions.
[Directed Call Pickup]
•
A user can also pick up a call to a specified extension by pressing the corresponding DSS button. This
feature is only available when (1) the user's extension is allowed to use this feature through COS
programming, (2) DSS buttons for extensions or incoming call distribution (ICD) groups have this feature
enabled through system programming, and (3) the light pattern of DSS buttons for incoming calls to
extensions or ICD groups is set to "On or Flash" through system programming.
The light pattern of a DSS button for an incoming call to an extension or Incoming Call Distribution (ICD)
group can be programmed through system programming. Call Pickup is available only when the DSS button
is red flashing.
Document Version 2009-12
A specified extension's call is answered.
A call within a specified call pickup group is answered.
Description
3.1.8 Call Pickup
Feature Manual
43