Panasonic KX-TDE100 Feature Manual page 103

Button
Flexible CO
INTERCOM
AUTO ANS (Auto Answer)/
MUTE
VOICE CALL/MUTE
AUTO DIAL/STORE
CONF (Conference)
FWD/DND
PAUSE
Soft
SELECT
SHIFT
MODE
NEXT PAGE
[DSS Console]
Button
ANSWER
RELEASE
Flexible CO
Flexible DSS (Direct Station
Selection)
PF (Programmable Feature)
Conditions
•
Certain buttons are equipped with a light to indicate the status of the corresponding line or feature.
Document Version 2009-12
Used to access a CO line or trunk group when making or receiving a
call according to the button's preprogrammed CO Line Access method
(Default: S-CO). Can also be customized as a different feature button.
Used to make or receive intercom calls.
Used to receive an incoming call in hands-free mode, or used to mute
the built-in microphone or handset during a conversation.
Used to monitor an intercom call automatically (a hands-free
conversation is not possible). Also used to mute the handset during a
conversation.
Used for System/Personal Speed Dialing and storing program
changes.
Used to establish a multiparty conversation.
Used to set Call Forwarding (FWD) or Do Not Disturb (DND).
Used to insert a dialing pause in a stored number. Also used as the
Program button on analog proprietary telephones (APTs) which do not
have the PROGRAM button.
Used to select the item displayed on the bottom line of the display.
Used to select the displayed item or to call the displayed number.
Used to access the second level of Soft button items.
Used to change the current display to access various features.
Used to switch the page for the Self Labeling feature (KX-NT366 only).
Used to answer an incoming call, or place the current call on hold and
answer another call with a one-touch operation.
Used to disconnect the line during or after a conversation, or to
complete a Call Transfer.
Used to access a CO line or trunk group when making or receiving a
call according to the button's preprogrammed CO Line Access method.
Can also be customized as a different feature button.
Used to call an extension with a one-touch operation. Each button is
programmed to correspond to an extension. DSS buttons can also be
customized as other different feature buttons.
Used to access a preprogrammed feature with a one-touch operation.
(no default)
6.1.1 Fixed Buttons
Usage
Usage
Feature Manual 103