Easy Setup Wizard - Dell Networking N4000 Series Getting Started Manual
Highly scalable, non-stop networking switches for campus aggregation and core switching 10 gbe deployments
Hide thumbs
Also See for Networking N4000 Series:
- Configuration manual (1460 pages) ,
- Reference manual (2332 pages) ,
- Getting started manual (60 pages)
Advertisement
Available languages
Available languages
サ ンプルセ ッ シ ョ ン
Easy Setup Wizard
メ モ ：
SNMP
•
•
admin123
OOB
•
192.168.2.1
メ モ ：
POST
(Unit 1-Waiting to select management unit)>
Applying Global configuration, please wait...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly
as possible. You can skip the setup wizard, and enter
CLI mode to manually configure the switch. You must
respond to the next question to run the setup wizard
within 60 seconds, otherwise the system will continue
with normal operation using the default system
configuration. Note: You can exit the setup wizard at
any point by entering [ctrl+z].
Would you like to run the setup wizard (you must
answer this question within 60 seconds)? [Y/N] y
194
IP
root
IP
Dell Easy Setup Wizard
<Enter>
[ ]
Hide quick links:
Advertisement
Chapters
