Bright Adjustment (Pd-105 Board); Contrast Adjustment (Pd-105 Board) - Sony Handycam Vision CCD-TRV66E Service Manual

4. Bright Adjustment (PD-105 board)

Set the level of the VIDEO signal for driving the LCD to the specified
value. If deviated, the screen image will be blackish or saturated
(whitish).
Mode VTR stop
Signal No signal
Pin 3 of CN5501 (VG)
Measurement Point
External trigger : Pin 4 of CN5501
(PANEL COM)
Measuring Instrument Oscilloscope
Adjustment Page E
Adjustment Address D1
Specified Value A = 1.34 ± 0.05V
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 2, address: 01, set data: 55, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 6, address: 7D, and set data: 40.
4) Select page: E, address: D1, change the data and set the voltage
(A) between the pedestal and white to the specified value. (The
data of address: D1 should be "41" to "BF".)
5) Press the PAUSE button.
6) Select page: 2, address: 01, set data: 00, and press the PAUSE
button.
7) Select page: 6, address: 7D, and set data: 00.
8) Select page: 0, address: 01, and set data: 00.
White
A
Pedestal
Fig. 5-1-19.
2H

5. Contrast Adjustment (PD-105 board)

Set the level of the VIDEO signal for driving the LCD to the specified
value. If deviated, the screen image will be blackish or saturated
(whitish).
Mode
Signal
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified Value
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 2, address: 01, set data: 55, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 6, address: 7D, and set data: 00.
4) Select page: E, address: D5, change the data and set the voltage
(A) between the pedestal (0 IRE) and 100 IRE to the specified
value.
5) Press the PAUSE button.
6) Select page: 2, address: 01, set data: 00, and press the PAUSE
button.
7) Select page: 0, address: 01, and set data: 00.
100 IRE
A
0 IRE
5-26
VTR stop
No signal
Pin 3 of CN5501 (VG)
External trigger : Pin 4 of CN5501
(PANEL COM)
Oscilloscope
E
D5
A = 2.60 ± 0.07V
2H
Fig. 5-1-20.