1. Manuals
  2. Brands
  3. Sony Manuals
  4. Camcorder
  5. Handycam Vision CCD-TRV77E
  6. Operating instructions manual

Sony Handycam Vision CCD-TRV77E Operating Instructions Manual

Sony video camera recorder operating instructions
Hide thumbs Also See for Handycam Vision CCD-TRV77E:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
3-865-658-13 (1)
Video Camera
Recorder

Operating Instructions

Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
Перед эксплуатацией аппарата внимательно прочтите,
пожалуйста, данное руководство и сохраняйте его для
дальнейших справок.
CCD-TRV77E
CCD-TRV66E /TRV77E
©1998 by Sony Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony Handycam Vision CCD-TRV77E

Summary of Contents for Sony Handycam Vision CCD-TRV77E

  • Page 1: Operating Instructions

    Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ Перед эксплуатацией аппарата внимательно прочтите, пожалуйста, данное руководство и сохраняйте его для дальнейших справок. CCD-TRV77E CCD-TRV66E /TRV77E ©1998 by Sony Corporation...
  • Page 2 English Welcome! Congratulations on your purchase of this Sony Handycam Vision camcorder. With your Handycam Vision you can capture life’s precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use.

  • Page 3: Table Of Contents

    Changing the MENU settings ... 79 Resetting the date and time ... 91 Additional Information Usable cassettes and playback modes ... 93 Changing the lithium battery in your camcorder ... 96 Troubleshooting ... 98 Self-diagnosis display ... 101 Warning indicators and messages ... 102 Using your camcorder abroad ...
  • Page 4 Русский Оглавление Проверка прилагаемых принадлежностей ... 5 Руководство по быстрому запуску ... 8 Подготовка к эксплуатации Использование данного руководства ... 10 Пункт 1 Подготовка источника питания ... 12 Установка батарейного блока ... 12 Зарядка батарейного блока ... 13 Подсоединение к сетевой розетке ... 17 Пункт...

  • Page 5: Checking Supplied Accessories

    7 Shoulder strap (1) (p. 118) 8 21-pin adaptor (1) (p. 38) Contents of the recording cannot be compensated if recording or playback is not made due to a malfunction of the camcorder, video tape, etc. Проверка прилагаемых принадлежностей Убедитесь, что следующие принадлежности...

  • Page 6: Quick Start Guide

    English Quick Start Guide Connecting the mains lead Use the battery pack when using your camcorder outdoors (p. 12). Inserting a cassette Slide EJECT in the direction of the arrow while pressing the small blue button. This chapter introduces you to the basic features of your camcorder.
  • Page 7 POWER CAMERA PLAYER NOTE Do not pick up your camcorder by holding the viewfinder or by holding the LCD panel. (p. 20) Turn STANDBY to STANDBY. The picture appears on the LCD screen. START/STOP Press the red button.

  • Page 8: Руководство По Быстрому Запуску

    Русский Руководство по быстрому запуску Подсоединение провода электропитания При пользовании видеокамерой вне помещения используйте батарейный блок (стр. 12). Установка кассеты Передвиньте переключатель EJECT в направлении стрелки, нажав маленькую синюю кнопку. В данной главе приведены основные функции Вашей видеокамеры. Подробные сведения содержатся приведены...
  • Page 9 Запись изображения Установите переключатель POWER в положение POWER CAMERA, нажав CAMERA маленькую PLAYER зеленую кнопку. Откройте панель ЖКД, нажав Видоискатель кнопку OPEN. Если панель ЖКД закрыта, воспользуйтесь видоискателем, приставив глаз к окуляру. Контроль воспроизводимого изображения на экране ЖКД (стр. 32) Установите...

  • Page 10: Getting Started

    “CCD-TRV77E only.” As you read through this manual, buttons and settings on your camcorder are shown in capital letters. e.g. Set the POWER switch to CAMERA. When you carry out an operation, you can hear a beep sound to indicate that the operation is being carried out.

  • Page 11: Precautions On Camcorder Care

    60°C (140°F ), such as in a car parked in the sun or under direct sunlight [b]. •Do not place your camcorder so as to point the viewfinder or the LCD screen toward the sun. The inside of the viewfinder or the LCD screen may be damaged [c].

  • Page 12: Step 1 Preparing The Power Supply

    Step 1 Preparing the power supply Installing the battery pack Install the battery pack to use your camcorder outdoors. Slide the battery pack down. To remove the battery pack Slide the battery pack out in the direction of the arrow while pressing BATT RELEASE down.

  • Page 13: Charging The Battery Pack

    Use the battery pack after charging it for your camcorder. Your camcorder operates only with the “InfoLITHIUM” battery pack (L series). “InfoLITHIUM” is a trademark of Sony Corporation. (1) Open the DC IN jack cover and connect the AC power adaptor supplied with your camcorder to the DC IN jack with the plug’s 4...
  • Page 14 Battery pack The battery pack is charged a little before it leaves the factory. Until your camcorder calculates the actual remaining battery time “– – – – min” appears in the display window. If there is a slight difference in shape between...
  • Page 15 * Approximate continuous recording time at 25 C (77 F). The battery life will be shorter if you use your camcorder in a cold environment. ** Approximate number of minutes when recording while you repeat recording start/ stop, zooming and turning the power on/off.
  • Page 16 This unit is compatible with the “InfoLITHIUM” battery pack (L series). Your camcorder operates only with the “InfoLITHIUM” battery. “InfoLITHIUM” battery packs have the mark. “InfoLITHIUM” is a trademark of Sony Corporation. Пункт 1 Подготовка источника Playing time Playing time...

  • Page 17: Connecting To The Mains

    Step 1 Preparing the power supply Connecting to the mains When you use your camcorder for a long time, we recommend that you power it from the mains using the AC power adaptor. (1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN jack on your camcorder with the plug’s 4 mark facing up.
  • Page 18 •Keep the AC power adaptor away from the camcorder if the picture is disturbed. Using a car battery Use Sony DC Adaptor/Charger (not supplied). Пункт 1 Подготовка источника питания ПРЕДУПРЕЖДЕНИЕ Сетевой провод должен быть заменен только...

  • Page 19: Step 2 Inserting A Cassette

    Step 2 Inserting a cassette When you want to record in the Hi8 system, use Hi8 video cassette H. (1) Slide EJECT in the direction of the arrow while pressing the small blue button. The cassette compartment automatically lifts up and opens.

  • Page 20: Recording - Basics

    (5) Press START/STOP. Your camcorder starts recording. The “REC” indicator appears. The camera recording lamp located on the front of your camcorder lights up. To stop recording, press START/STOP again. The recording lamp lights up in the viewfinder when you record with the viewfinder.

  • Page 21: Adjusting The Lcd Screen

    (Mirror mode). to brighten/ to dim/ темнее When closing the LCD panel, set it vertically until it clicks, and swing it into the camcorder body. Запись изображения Примечания Плотно пристегните ремень для захвата видеокамеры. Не прикасайтесь к...
  • Page 22 (2) Close the LCD panel. (3) Eject the cassette. (4) Set the POWER switch to OFF. After use your camcorder (CCD-TRV66E only) Remove the battery pack from your camcorder to avoid turning on the built-in light. Запись изображения Примечание При использовании экрана ЖКД...
  • Page 23 Recording a picture To record pictures with the viewfinder – adjusting the viewfinder If you record pictures with the LCD panel closed, check the picture with the viewfinder. Adjust the viewfinder lens to your eyesight so that the indicators in the viewfinder come into sharp focus.

  • Page 24: Using The Zoom Feature

    Recording a picture Using the zoom feature Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the Zoom function sparingly results in better-looking recordings. “T” side: for telephoto (subject appears closer) “W”...
  • Page 25 Recording starts when you press START/ STOP, and stops when you press it again (factory setting). ANTI GROUND SHOOTING The camcorder records only while you press START/STOP. Use this mode to avoid recording unnecessary scenes. 5SEC: When you press use this mode to START/ STOP, your camcorder records for 5 seconds and then stops automatically.

  • Page 26: Shooting Backlit Subjects (Back Light)

    Recording a picture Indicators displayed in the recording mode The indicators are not recorded on tape. Hi8 format indicator This appears while playing back or recording in Hi8 format./ Индикатор формата Hi8 Этот индикатор появляется во время воспроизведения или записи в формате Hi8. Recording mode indicator/Индикатор...

  • Page 27: Shooting In The Dark (Nightshot)

    For example, you can satisfactorily record the environment of nocturnal animals for observation when you use this function. (1) While your camcorder is in the standby mode, slide NIGHTSHOT to ON. (2) Press START/STOP to start recording. and “NIGHTSHOT” indicators flash on the LCD screen or in the viewfinder.
  • Page 28 Notes •Do not use the NightShot function in bright places (ex. outdoors in the daytime). This may cause your camcorder to malfunction. •When you keep setting NIGHTSHOT to ON in normal recording, the picture may be recorded in incorrect or unnatural colours.

  • Page 29: Superimposing The Date And Time On Pictures

    Recording a picture Superimposing the date and time on pictures You can record the date or time displayed in the viewfinder or on the LCD screen superimposed on the picture. Carry out the following operations in the standby or recording mode. Press DATE to record the date.

  • Page 30: Checking The Recording End Search / Editsearch / Rec Review

    Checking the recording – END SEARCH / EDITSEARCH / Rec Review You can use these buttons to check the recorded picture or shoot so that the transition between the last recorded scene and the next scene you record is smooth. END SEARCH You can go to the end of the recorded section after you record.

  • Page 31: Rec Review

    Checking the recording – END SEARCH / EDITSEARCH / Rec Review EDITSEARCH You can search for the next recording start point. Hold down the +/– (Œ) side of EDITSEARCH in the standby mode. The recorded section is played back. + : to go forward –...

  • Page 32: Playback - Basics

    (4) Press 0 to rewind the tape. (5) Press ( to start playback. (6) To adjust the volume, press either of the two buttons on VOLUME. The speaker on your camcorder is silent when the LCD panel is closed. To stop playback Press p.
  • Page 33 When monitoring on the LCD screen You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out [a]. You can adjust the angle of the LCD panel by lifting the LCD panel up by 15 degrees [b].
  • Page 34 •A blank section of the tape is being played back. •The tape is unreadable due to tape damage or noise. •The tape was recorded by a camcorder without the date and time set. •The tape was recorded by a camcorder without the data code function.

  • Page 35: Various Playback Modes

    Playing back a tape Various playback modes To operate control buttons, set the POWER switch to PLAYER. To view a still picture (playback pause) Press P during playback. To resume playback, press P or (. To advance the tape Press ) in the stop mode. To resume normal playback, press (.
  • Page 36 In the various playback modes Sound is muted. When the playback pause mode lasts for 5 minutes Your camcorder automatically enters the stop mode. To resume playback, press (. If slow playback lasts for about 1 minute Your camcorder automatically returns to normal speed.

  • Page 37: Viewing The Recording On Tv

    Viewing the recording on TV Connect your camcorder to your TV or VCR with the A/V connecting cable supplied with your camcorder to watch the playback picture on the TV screen. You can operate the playback control buttons in the same way as when you monitor playback pictures on the LCD screen.
  • Page 38 Viewing the recording on TV If your TV is already connected to a VCR Connect your camcorder to the LINE IN input on the VCR by using the A/V connecting cable supplied with your camcorder. Set the input selector on the VCR to LINE.
  • Page 39 TV to VCR. (3) Press LASER LINK. The lamp of LASER LINK lights up. (4) Press ( on your camcorder to start playback. (5) Point the LASER LINK emitter at the AV cordless IR receiver. Adjust the position of your camcorder and the AV cordless IR receiver to obtain clear playback pictures.

  • Page 40: Advanced Recording Operations

    ВЫВЕДЕНИЕМ SHUTTER PHOTO/ ФОТО С ЗАТВОРОМ (1) While your camcorder is in the standby mode, select the photo mode in the MENU settings (p. 79). (2) Keep pressing PHOTO lightly until a still picture appears. CAPTURE appears. Recording does not start yet.
  • Page 41 To record a still picture during normal recording Press PHOTO deeper. The still picture is then recorded for about seven seconds and your camcorder returns to the standby mode. You cannot select another still picture. Фотосъемка Примечания • Во время фотосъемки Вы не можете...

  • Page 42: Using The Wide Mode

    Using the wide mode You can record a cinema-like picture (CINEMA) or a 16:9 wide picture to watch on the 16:9 wide- screen TV (16:9FULL). Refer to the operating instructions of your TV. CINEMA Black bands appear on the screen during recording in the CINEMA mode [a], playing back on a normal TV [b] or a wide-screen TV [c].
  • Page 43 Using the wide mode In the standby mode, set 16:9WIDE to CINEMA or 16:9FULL in the MENU settings (p. 79). To cancel the wide mode Set 16:9WIDE to OFF in the MENU settings. If the wide mode is set to 16:9FULL The SteadyShot function does not work.

  • Page 44: Using The Fader Function

    Using the fader function You can fade in or out to give your recording a professional appearance. FADER M.FADER (mosaic)/ (мозаика) STRIPE BOUNCE (Fade in only)/ (Только введение изображения) OVERLAP (Fade in only)/ (Только введение изображения) WIPE (Fade in only)/ (Только...
  • Page 45 FADER FADER To cancel the fader function After the fade in/out is carried out : Your camcorder automatically returns to the normal mode. Before the fade in/out is carried out : Before pressing START/STOP, press FADER until the indicator disappears.
  • Page 46 If you do not record anything before operating the wipe or overlap function Your camcorder stores the image on the tape. As the image is being stored, the WIPE or OVERLAP indicator flashes quickly, and the picture you are shooting disappears from the viewfinder.

  • Page 47: Using Special Effects - Picture Effect

    Using special effects – Picture effect You can digitally process images to obtain special effects like those in films or on the TV. PASTEL [a] : The contrast of the picture is emphasized, and the picture looks like an animated cartoon. NEG.
  • Page 48 While using the picture effect function You cannot select the old movie mode with DIGITAL EFFECT. When you turn the power off Your camcorder automatically returns to the normal mode. Использование специальных эффектов – Эффект изображения (1) Нажмите кнопку PICTURE EFFECT в...

  • Page 49: Using Special Effects - Digital Effect

    However, the picture may be less clear. OLD MOVIE You can add an old movie type atmosphere to pictures. Your camcorder automatically sets the wide mode to CINEMA, picture effect to SEPIA, and the appropriate shutter speed. Still picture/ Неподвижное...
  • Page 50 Using special effects – Digital effect (1) While your camcorder is in the standby or recording mode, press DIGITAL EFFECT. The digital effect indicator appears. (2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode. The indicator changes as follows: STILL ˜...
  • Page 51 Using special effects – Digital Effect To cancel the digital effect Press DIGITAL EFFECT. The digital effect indicator disappears. Notes •The following functions do not work during digital effect: – Fader – Low lux mode of PROGRAM AE – Photo recording –...

  • Page 52: Using The Program Ae Function

    Landscape mode This mode is for when you are recording distant subjects such as mountains and prevents your camcorder from focusing on glass or metal mesh in windows when you are recording a subject behind glass or a screen. Low lux mode This mode makes subjects brighter in insufficient light.
  • Page 53 Using the PROGRAM AE function (1) Press PROGRAM AE in the standby mode. The PROGRAM AE indicator appears. (2) Turn the SEL/PUSH EXEC dial to select the desired PROGRAM AE mode. The indicator changes as follows: ˜ ˜ ˜ ˜ To turn the PROGRAM AE function Press PROGRAM AE.
  • Page 54 •In the spotlight, sports lesson and beach & ski modes, you cannot take close-ups. This is because your camcorder is set to focus only on subjects in the middle to far distance. •In the sunset & moon and landscape modes, your camcorder is set to focus only on distant subjects.

  • Page 55: Adjusting The Exposure Manually

    Adjusting the exposure manually You can manually adjust and set the exposure. When you turn your camcorder on, it will automatically be in the automatic exposure mode. This mode works to record subjects so that they are recorded slightly brighter than they actually are.

  • Page 56: Focusing Manually

    Focusing manually You can gain better results by manually adjusting the focus in the following cases: •The autofocus mode is not effective when shooting – subjects through glass coated with water droplets – horizontal stripes – subjects with little contrast with backgrounds such as walls and sky •When you want to change the focus from a subject in the foreground to a subject in the...
  • Page 57 When you press FOCUS down to INFINITY, the lens focuses on infinity. When you release FOCUS, your camcorder returns to the manual focus mode. Use this mode when your camcorder focuses on near objects even though you are trying to shoot a distant object.

  • Page 58: Superimposing A Title

    Superimposing a title You can select one of eight preset titles and two custom titles (p. 60). You can also select the language, colour, size and position of titles. (1) Press TITLE in the standby mode. (2) Turn the SEL/PUSH EXEC dial to select then press the dial.
  • Page 59 Superimposing a title To superimpose the title while you are recording Press TITLE while you are recording, and carry out steps 2 to 5. When you press the SEL/PUSH EXEC dial at step 5, the title is superimposed. To select the language of a preset title If you want to change the language, select before step 2.

  • Page 60: Making Your Own Titles

    Making your own titles You can make up to two titles and store them in your camcorder. Each title can have up to 20 characters. (1) Press TITLE in the standby or PLAYER mode. (2) Turn the SEL/PUSH EXEC dial to select then press the dial.
  • Page 61 1. We recommend setting the POWER switch to PLAYER or removing the cassette so that your camcorder does not automatically turn off while you are entering title characters. If you select [ The menu for selecting alphabet and Russian characters appear.

  • Page 62: Inserting A Scene (Ccd-Trv77E Only)

    Remote Commander. Set COUNTER to NORMAL in the MENU settings to display the tape counter. (1) While your camcorder is in the standby mode, keep pressing EDITSEARCH, and release the button at the insert end point [ b].

  • Page 63: Inserting A Scene

    Inserting a scene Notes •The zero memory function does not work when the RC time code is displayed. •The picture and the sound may be distorted at the end of the inserted section when it is played back. If you re-record on the section which contains a non-recorded section The zero memory function may not work correctly.

  • Page 64: Using The Built-In Light (Ccd-Trv66E Only)

    – CCD-TRV66E only You can use the built-in light to suit your shooting situation. The recommended distance between the subject and camcorder is about 1.5 m (5 feet). Slide LIGHT to ON while your camcorder is in the standby mode. The built-in light turns on.

  • Page 65: Using The Built-In Light

    •While the end search function is working, the built-in light is turned off. Replacing the bulb Use the Sony XB-3D halogen lamp (not supplied). The supplied halogen lamp is not on the market. Purchase the Sony XB-3D halogen lamp.
  • Page 66 Using the built-in light CAUTION •When replacing the bulb, use only the Sony XB-3D halogen lamp (not supplied) to reduce the risk of fire. •To prevent possible burn hazard, disconnect the power source before replacing and do not touch the bulb until the bulb becomes cool enough to handle (for about 30 minutes or more).

  • Page 67: Advanced Playback Operations

    To cancel the digital effect function Press DIGITAL EFFECT. Notes • You cannot record image-processed pictures on your camcorder. Record them on the VCR using your camcorder as a player. • In various speed playback, noise appears on the picture. This is not a malfunction.

  • Page 68: Searching A Recording By Date (Ccd-Trv77E Only)

    [c]. Your camcorder automatically starts playback at the point where the date changes. REW 3 To stop the date scan mode Press (. Your camcorder returns to the normal playback mode. Поиск записи по дате – Только модель CCD-TRV77E Вы...
  • Page 69 0 or ). If you use the date search or date scan mode during playback While your camcorder is looking for the date, a fast forward or rewind picture is displayed. At this time, noise appears on the picture.

  • Page 70: Quickly Locating A Scene Using The Zero Memory Function (Ccd-Trv77E Only)

    – CCD-TRV77E only Your camcorder goes forward or backward to automatically stop at a desired scene having a counter value of “0:00:00”. You can do this with the Remote Commander. To do this, set COUNTER to NORMAL in the MENU settings.

  • Page 71: Ccd-Trv77E Only

    Searching a r e cording by index – CCD-TRV77E only You can scan the beginning of a desired scene (Index scan) or locate the desired scene easily (Index search) . Using the Remote Commander, mark an index signal during recording or playback and search for it later.
  • Page 72 Searching a recording by index Marking an index signal Mark an index signal at the point you want to locate later. When marking at the beginning of recording or playback Press INDEX MARK in the recording standby or playback pause modes. The INDEX MARK indicator appears.
  • Page 73 •If you mark an index signal on the tape with the data code recorded, the data code will be erased at the point where the index signal is marked. When playing back this tape, your camcorder keeps displaying the data code immediately before the erased one.

  • Page 74: Erasing An Index Signal

    (2) Press ERASE within 2 to 10 seconds after the playback of the desired scene begins. After the index signal is erased, your camcorder returns to the index scan when you used index scan in step 1. When you used index search, your camcorder returns to the normal playback mode.

  • Page 75: Editing On Other Equipment

    S VIDEO AUDIO : Signal flow/Передача сигнала When you have finished dubbing a tape Press p on both your camcorder and the VCR. To prevent deterioration of pictures from dubbing Set EDIT to ON in the MENU settings before dubbing.
  • Page 76 If your VCR is a monaural type Connect the yellow plug for video and the white plug for audio on both your camcorder and the VCR. You do not need to connect the red plug. With this connection, the sound will be monaural.

  • Page 77: Entering The Rc Time Code For Editing (Ccd-Trv77E Only)

    VCR without the RC time code function. (1) Set the POWER switch to PLAYER. (2) Rewind the tape to the beginning, and set your camcorder to the playback pause mode by pressing (, then press P. (3) Press TIME CODE WRITE. The TIME CODE WRITE indicator flashes.
  • Page 78 Entering the RC time code for editing To stop writing the RC time code Press p (or any video control button). To write the RC time code from the end of the RC time code recorded section In step 2, rewind the tape to the scene to which the RC time code has been written, and carry out steps 3 and 4.

  • Page 79: Customizing Your Camcorder

    — Customizing Your Camcorder — Changing the MENU settings To change the mode settings in the MENU settings, select the menu items with the SEL/ PUSH EXEC dial. The factory settings can be partially changed. First, select the icon, then the menu item and then the mode.
  • Page 80 Changing the MENU settings CAMERA CAMERA SET MENU D ZOOM 16 : 9WIDE STEADYSHOT N. S. LIGHT WIND PHOTO [MENU] : END To make the MENU display disappear Press MENU. Изменение установок MENU PLAYER PLAYER SET H i F i SOUND E D I T NTSC PB [MENU] : END...

  • Page 81: Selecting The Mode Setting Of Each Item

    PLAYER SET LCD SET TAPE SET SETUP MENU OTHERS Depending on your camcorder model The MENU display may be different from that in this illustration. English Selecting the mode setting of each item Menu items differ according to whether the POWER switch is set to PLAYER or CAMERA.
  • Page 82 To reduce picture noise To reduce a conspicuous afterimage when the picture has a lot of movement To play back a tape recorded on your camcorder on a PAL system TV To play back a tape recorded in the NTSC colour system on a TV with the NTSC 4.43 mode...
  • Page 83 Notes on the LP mode •When you record a tape in the LP mode on your camcorder, we recommend playing the tape on your camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in pictures or sound.
  • Page 84 ON Notes on DEMO MODE •You cannot select DEMO MODE when a cassette is inserted in your camcorder. •DEMO MODE is set to STBY (Standby) at the factory and the demonstration starts about 10 minutes after you have set the POWER switch to CAMERA without a cassette inserted.
  • Page 85 If you press DISPLAY with “DISPLAY” set to “V-OUT/LCD” in the MENU settings, the picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected to outputs on the TV or VCR.
  • Page 86 Изменение установок MENU Русский Выбор установок режима по каждому пункту Пункты меню отличаются в зависимости от того, установлен переключатель POWER в положение PLAYER или CAMERA. Пиктограмма/ пункт Режим D ZOOM r ON 16:9WIDE r OFF CINEMA 16:9FULL STEADYSHOT r ON N.S.
  • Page 87 Изменение установок MENU Пиктограмма/ пункт Режим HiFi SOUND r STEREO r OFF EDIT r ON ТВС означает “Time Base Corrector” (корректор базы времени). r ON DNR означает “Digital Noise Reduction” (цифровое уменьшение помех). r ON PAL TV NTSC PB NTSC 4.43 r BRT NORMAL LCD B.
  • Page 88 Изменение установок MENU Пиктограмма/ пункт Режим REC MODE r SP ORC TO SET ORC означает “Optimizing the Recording Condition” (оптимизация условий записи). Ò REMAIN r AUTO COUNTER r NORMAL (только модель TIME CODE CCD-TRV77E) Примечания по режиму LP • При записи на ленту в режиме LP на Вашей видеокамере рекомендуется воспроизводит ленту...
  • Page 89 Изменение установок MENU Пиктограмма/ пункт Режим CLOCK SET AUTO DATE r ON (только модель CCD-TRV66E) LTR SIZE r NORMAL DEMO MODE r ON Примечания по режиму DEMO MODE • Вы не можете выбрать команду DEMO MODE, если кассета вставлена в Вашу видеокамеру. •...
  • Page 90 Изменение установок MENU Пиктограмма/ пункт Режим WORLD TIME BEEP r MELODY NORMAL COMMANDER r ON DISPLAY r LCD V-OUT/LCD REC LAMP r ON INDICATOR r BL OFF BL ON Примечание Если Вы нажмете кнопку DISPLAY в то время, когда команда “DISPLAY” установлена в положение...

  • Page 91: Resetting The Date And Time

    First, set the year, then the month, the day, the hour and then the minute. (1) While the camcorder is in the standby mode, press MENU to display the MENU settings. (2) Turn the SEL/PUSH EXEC dial to select then press the dial.
  • Page 92 1998 ˜ 1999 N · · · · n 2029 Auto date function (CCD-TRV66E only) When you use your camcorder for the first time, turn it on and reset the date and time to your time before you start recording (p. 91). The date is automatically recorded for 10 seconds after you start recording (Auto date function).

  • Page 93: Additional Information

    The playback quality will be the normal quality of the Hi8 camcorder when video tapes recorded on an “XR” camcorder are played back by a conventional Hi8 camcorder or when video tapes recorded on a conventional Hi8 camcorder are played back on the “XR”...
  • Page 94 Note on AFM HiFi stereo When you play back a tape, the sound will be monaural if: •You record the tape on your camcorder, then play it back on an AFM HiFi monaural video recorder/player. •You record the tape on an AFM HiFi monaural video recorder, then play it back on your camcorder.
  • Page 95 Stereo STEREO Monaural Unnatural sound You cannot record dual sound programmes on your camcorder. Используемые кассеты и режимы воспроизведения При воспроизведении ленты с двойной звуковой дорожкой При воспроизведении ленты с двойной звуковой дорожкой на стереофонической системе AFM HiFi установите команду “HiFi SOUND”...

  • Page 96: Changing The Lithium Battery In Your Camcorder

    I indicator flashes in the viewfinder for about 5 seconds when you set the POWER switch to CAMERA. In this case, replace the battery with a Sony CR2025 lithium battery. Use of any other battery may present a risk of fire or explosion. Discard used batteries according to the manufacturer’s instructions.

  • Page 97: Changing The Lithium Battery In Your Camcorder

    (1) Open the LCD panel and open the lid of the lithium battery compartment. (2) Push the lithium battery down once and pull it out from the holder. (3) Install a Sony CR2025 lithium battery with the positive (+) side facing out. (4) Close the lid. Замена литиевой батарейки в...

  • Page 98: Troubleshooting

    If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer or local authorized Sony service facility. If “C:ππ:ππ” appears on the LCD screen or in the viewfinder, the self-diagnosis display function has worked.
  • Page 99 Set it to OFF. (p. 79) • The video head may be dirty. m Clean the heads using the Sony V8-25CLH/V8-25CLD cleaning cassette (not supplied). (p. 110) • The stereo tape is played back with HiFi SOUND set to 2 in the MENU settings.
  • Page 100 Remove the cassette and insert it again, then operate your camcorder. • The AC power adaptor is disconnected. m Connect it firmly. (p. 13) • Something is wrong with the battery pack. m Contact your Sony dealer or local authorized Sony service facility.

  • Page 101: Self-Diagnosis Display

    After reconnecting the power source, operate your camcorder. • A malfunction that you cannot service has occurred. m Contact your Sony dealer or local authorized Sony service facility and inform them of the 5-digit code. (example: E:61:10)

  • Page 102: Warning Indicators And Messages

    CASSETTE * You hear the melody or beep sound. The video heads are dirty Fast flashing: •You need to clean the heads using the Sony V8-25CLH/ V8-25CLD cleaning cassette (not supplied) (p. 110). Self-diagnosis display (p. 101) C:21:00 Moisture condensation has...

  • Page 103: Поиск И Устранение Неисправностей

    Если у Вас возникла какая-либо проблема при использовании видеокамеры, воспользуйтесь следующей таблицей для отыскания и устранения проблемы. Если проблема не устраняется, то следует отсоединить источник питания и обратиться в сервисный центр Sony или в местное уполномоченное предприятие по обслуживанию изделий Sony. Если на экране ЖКД или в...
  • Page 104 Установите ее в положение OFF. (стр. 79) • Возможно, загрязнены видеоголовки. m Почистите видеоголовки с помощью очистительной кассеты Sony V8-25CLH/V8-25CLD (не прилагается). (стр. 110) • Стереофоническая лента воспроизводится при установленном переключателе HiFi SOUND в положение 2 в установках меню.
  • Page 105 Выньте кассету и вставьте ее снова, а затем включите Вашу видеокамеру. • Отсоединен сетевой адаптер переменного тока. m Подсоедините его плотно. (стр. 13) • Неполадка с батарейным блоком. m Обратитесь в сервисный центр Sony или в местное уполно- моченное предприятие по обслуживанию изделий Sony.

  • Page 106: Индикация Самодиагностики

    C:32:ππ E:61:ππ E:62:ππ Если Вы не можете самостоятельно устранить неполадку даже после опробования соответствующих методов устранения несколько раз, обратитесь в сервисный центр Sony или в местное уполномоченное предприятие по обслуживанию изделий Sony. Видоискатель (или экран ЖКД) Индикация самодиагностики • С:ππ:ππ...

  • Page 107: Предупреждающие Индикаторы И Сообщения

    • Индикаторы и сообщения отображаются желтым цветом. Предупреждающие индикаторы Загрязнились видеоголовки Быстрое мигание: • Вам нужно почистить головки с помощью очистительной кассеты Sony V8-25CLH/V8-25CLD (не прилагается). (стр. 110). Батарейный блок разрядился или почти разрядился Медленное мигание: • Батарейный блок почти разряжен.

  • Page 108: Using Your Camcorder Abroad

    Using your camcorder abroad Using your camcorder abroad You can use your camcorder in any country or area with the AC power adaptor supplied with your camcorder within 100 V to 240 V AC, 50/60 Hz. Your camcorder is a PAL system based camcorder.

  • Page 109: Maintenance Information And Precautions

    How to prevent moisture condensation When you bring your camcorder from a cold place into a warm place, put your camcorder in a plastic bag and tightly seal it. Remove the bag when the air temperature inside the plastic bag has reached the surrounding temperature (after about 1 hour).

  • Page 110: Maintenance Information And Precautions

    If this is the case, they must be replaced with new heads. Contact your Sony dealer or local authorized Sony service facility. Cleaning the LCD screen If fingerprints or dust make the LCD screen dirty, we recommend using a LCD Cleaning Kit (not supplied) to clean the LCD screen.
  • Page 111 •If any solid object or liquid get inside the casing, unplug your camcorder and have it checked by a Sony dealer before operating it any further. •Avoid rough handling or mechanical shock. Be particularly careful of the lens.
  • Page 112 Camcorder care •When your camcorder is not to be used for a long time, remove battery. (CCD-TRV66E only) •Remove the tape, and periodically turn on the...
  • Page 113 •If the liquid get into your eyes, wash your eyes with a lot of water and then consult a doctor. If any problem occurs, unplug your camcorder and contact your nearest Sony dealer. Информация по уходу за аппаратом и меры предосторожности...

  • Page 114: Specifications

    English Specifications Video camera recorder System Video recording system 2 rotary heads Helical scanning FM system Audio recording system Rotary heads, FM system Video signal PAL colour, CCIR standards Usable cassette 8mm video format cassette Hi8 or standard 8 Recording/playback time (using cassette E5/P5-90) SP mode: 1 hour and 30 minutes LP mode: 3 hours...

  • Page 115: Технические Характеристики

    Русский Технические характеристики Видеокамера Система Система видеозаписи 2 вращающиеся головки Система наклонной механической развертки ЧМ Система аудиозаписи Вращающиеся головки, система ЧМ Видеосигнал Цветовой сигнал PAL, стандарт МККР Используемые кассеты Кассеты 8-мм видеоформата Стандарт Hi8 или 8 Время записи/воспроизведения (при использовании кассеты Е5/ Р5-90) Режим...

  • Page 116: Quick Reference

    !∞ Hook for shoulder strap !§ DC IN jack (p. 13, 17) This mark indicates that this product is a genuine accessory for Sony video products. When purchasing Sony video products, Sony recommends that you purchase accessories with this “GENUINE VIDEO ACCESSORIES” mark.
  • Page 117 @ª Tripod receptacle (base) Make sure that the length of the tripod screw is less than 6.5 mm (9/32 inch). Otherwise, you cannot attach the tripod securely and the screw may damage your camcorder. Обозначение частей и регуляторов !¶ !¶ Кнопки видеоконтроля (стр. 32, 35) p STOP (остановка)
  • Page 118 $º MENU button (p. 40, 79) $¡ PICTURE EFFECT button (p. 48) Attaching the shoulder strap Attach the shoulder strap supplied with your camcorder to the hooks for the shoulder strap. Обозначение частей и регуляторов #º Отсек для литиевой батарейки (стр. 96) #¡...
  • Page 119 Identifying the parts and controls $™ $£ $¢ $™ COUNTER RESET button (p. 21) $£ TIME button (p. 29, 33) $¢ DATE button (p. 29, 33) $∞ DISPLAY button (p. 33) $§ END SEARCH button (p. 30) $¶ TITLE button (p. 58) What is LASER LINK? The LASER LINK system sends and receives pictures and sound between video equipment...
  • Page 120 In this case, WIND in the MENU settings does not function. %• VIDEO/AUDIO jacks (p. 37) %ª 2 (headphones) jack When you use headphones, the speaker on your camcorder is silent. Обозначение частей и регуляторов $• Видоискатель (стр. 23) $ª Выключатель EJECT (стр. 19) %º...

  • Page 121: Remote Commander

    Identifying the parts and controls Fastening the grip strap Fasten the grip strap firmly. Remote Commander The buttons that have the same name on the Remote Commander as on your camcorder function identically to the buttons on your camcorder. RMT-717 1 Transmitter 2 ZERO MEM button (p.
  • Page 122 1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid remote control misoperation. If you use another Sony VCR in the commander mode VTR 2, we recommend changing the commander mode or covering the sensor of the VCR with black paper.
  • Page 123 Identifying the parts and controls Operation indicators Viewfinder/Видоискатель STBY M.FADER CINEMA SEPIA „ !¡ !™ !£ 1 Recording mode indicator (p.26)/Mirror mode indicator (p. 21) 2 Hi8 format indicator (p. 26, 93) 3 Remaining battery time indicator (p. 25) 4 Exposure indicator (p. 55)/Zoom indicator (p.
  • Page 124 Identifying the parts and controls !¢ Video control mode (p. 35) !∞ Time code indicator (CCD-TRV77E only) (p. 77) !§ Tape counter (p. 26)/RC time code indicator (CCD-TRV77E only) (p. 77)/Self-diagnosis display function indicator (p. 101)/5SEC mode indicator (p. 25)/Photo mode indicator (p.

  • Page 125: Quick Function Guide

    English Quick Function Guide Functions to adjust exposure (in the recording mode) • In a dark place • In insufficient light • In dark environments such as sunset, fireworks, or general night views • Shooting backlit subjects • In spotlight, such as at the theatre or a formal event •...

  • Page 126: Руководство По Быстрым Функциям

    Русский Руководство по быстрым функциям Функции для регулировки экспозиции (в режиме записи) • В темном месте • При недостаточном освещении • В темных окружающих условиях, например, заход солнца, фейерверки или общие ночные виды • Съемка объектов с задней подсветкой • При прожекторном освещении, например, в театре или на официальной церемонии •...

  • Page 127: Index

    English Index A, B Adjusting viewfinder ... 23 AC power adaptor ... 13 AFM HiFi Sound ... 94 ANTI GROUND SHOOTING ... 25 A/V connecting cable ... 30, 75 BACK LIGHT ... 26 Battery pack ... 12 Beep ... 85 BOUNCE ...

  • Page 128: Алфавитный Указатель

    Код времени RC ... 77 Код даты ... 33 Конденсация влаги ... 109 Лента с двойной звуковой дорожкой ... 95 Sony Corporation Printed in Japan Лепесток защиты записи ... 19 Мозаичный фейдер ... 44 Монофонический звук ... 95 Н, О...

This manual is also suitable for:

Handycam vision ccd-trv66e

Table of Contents