Basic Connection - Panasonic Viera TH-L42E30G Operating Instructions Manual

Inserting and removing remote's batteries
1
2
Note the
correct polarity
(+ or -)

Basic Connection

External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any
leads.
Connecting aerial
Special notices for receiving digital terrestrial services
•
If you receive analogue and digital TV signals through two separate aerials, use an RF mixer to mix them.
•
If you receive analogue TV signals through a cable TV network, an aerial is required to receive digital
TV signals. In this case, using an RF mixer is not recommended because the TV signals interfere with
each other.
•
An RF selector is available to switch analogue and digital TV signal.
8
Pull Open
Hook
Close
Analogue and
Digital TV signal
Analogue or
Digital TV signal
Caution
•
Incorrect installation may cause battery leakage
and corrosion, resulting in damage to the remote
control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such as alkaline
and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
•
Do not disassemble or modify the remote control.
Aerial
Analogue
TV
RF mixer
Cable TV
network
Analogue
TV
RF selector
Aerial
Digital
TV
Aerial
Digital
TV