Panasonic Viera TH-L42E30G Operating Instructions Manual page 31

Audio Preference
• Auto
• MPEG
SPDIF Selection
• Auto
• PCM
HDMI1 / 2 / 3 / 4 Input
• Digital
• Analogue
Reset to Defaults
Timer
Item
Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 /
90 minutes
Auto Standby
• Off
• 2 / 4 hours
Selects the initial setting for audio tracks
[Auto]: Automatically selects the audio tracks if the programme has
more than two tracks. The priority is given in the following order -
Dolby Digital Plus, HE-AAC, Dolby Digital, MPEG.
[MPEG]: The priority is given to MPEG as long as the programme
contains MPEG audio.
•
Dolby Digital Plus and Dolby Digital are the method of coding digital
signals developed by Dolby Laboratories. Apart from stereo (2ch) audio,
these signals can be multi-channel audio.
•
HE-AAC is a perceptual coding method used to compress digital audio
for efficient storage and transmission.
•
MPEG is an audio compression method that compresses audio to the
smaller size without any considerable loss of audio quality.
•
Dolby Digital Plus and HE-AAC are the technologies for HD (High
definition) programmes.
•
Digital TV mode only
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal
[Auto]: Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and
MPEG are output as PCM.
[PCM]: Digital output signal is fixed to PCM.
•
For Digital TV mode, Video mode (p. 47) or Network video contents
(p. 58)
Selects to fit the input signal (p. 70)
[Digital]: HDMI cable connection
[Analogue]: HDMI-DVI adaptor cable connection
•
HDMI input mode only
Press the OK button to reset settings of the present [Mode], [Balance],
[Headphone Volume] and [Surround] in the Sound Menu to the default
Adjustments / Configurations (alternatives)
Sets the time until the TV automatically goes into Standby mode
Sets the time the TV automatically goes into Standby mode when no
operation is performed for the selected times
•
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
•
The notification message will appear 3 minutes before going into Standby mode.
31