Panasonic Viera TH-L42E30G Operating Instructions Manual page 72

Stereo / Bilingual Sound Selection (Analogue TV mode)
When you receive the stereo / bilingual sound system, sound output modes can be selected by
pressing the Sound Selection button.
Audio Signal
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of Regular broadcast
broadcast
Mode Indicator No Indicator
A2 (German) .......Used in Australia, Malaysia etc.
Type of Regular broadcast
broadcast
Mode Indicator No Indicator
•
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic
switching occurs, it is recommended you switch from STEREO to MONO.
•
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
•
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO
position, using the Sound Selection button.
•
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
Media Player
SD Card
Card format : SDXC Card - exFAT
SDHC Card / SD Card - FAT16 or FAT32
Compliant card type (maximum capacity) : SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB),
•
If miniSD Card is used, insert / remove it together with the adaptor.
•
Check the latest information on the card type at the following website.
(English only)
http://panasonic.jp/support/global/cs/tv/
•
Use an SD Card which meets SD standards. If not, it may cause the TV
to malfunction.
•
Do not remove the card while the TV is accessing data (this can damage
the card or TV).
•
Do not touch the pins on the back of the card.
•
Do not subject the card to high pressure or impact.
•
Insert the card in the correct direction (otherwise, card may be damaged).
•
Electrical interference, static electricity, or erroneous operation may
damage the data or card.
•
Back up the recorded data at regular intervals in case of deteriorated or
damaged data or erratic operation of the TV. (Panasonic is not liable for
any deterioration or damage of recorded data.)
USB Flash Memory
Format : FAT16, FAT32 or exFAT
On screen messages
Message
Cannot read file
No Device Inserted
No valid file to play
This operation is not possible
72
STEREO
Regular + NICAM MONO I
(Standard Audio)
BILINGUAL or DUAL MONO:
(Standard Audio)
MAIN I
(MAIN I )
MAIN I / SUB II
miniSD Card (2 GB) (requiring miniSD adaptor)
Meaning / Action
•
The file is broken or unreadable.
•
The TV does not support the format.
•
Confirm SD Card or USB device is inserted correctly.
•
The card has no data.
•
Your operation is not available.
SUB II MONO
NICAM NICAM DUAL MONO
STEREO (MAIN I / SUB II )
I
STEREO
32 mm
24 mm
II
2.1 mm