Setup the network connection
Set up the network connection to enable the network service functions such as VIERA Connect, etc.
(p. 16, 60).
•
To set up the wireless connection, the Wireless LAN Adaptor is required.
•
Please note that this TV does not support wireless public access points.
•
Ensure the network connections and network environment are completed before starting setup.
Connect the LAN cable or Wireless LAN Adaptor
1
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a
broadband network environment.
Rear of the TV
•
If you do not have any broadband network services, please consult your retailer for assistance.
•
For more information of the network connections (p. 52)
Select [Wired] or [Wireless]
2
Network Setup
Select Wired or Wireless
Wired
Wireless Set Later
Start the settings
3
■
[Wired]
Select [Auto]
Acquire IP Address
Auto
select
access
•
To set manually, select [Manual] and
set each item. For details
14
Wired connection
LAN cable (Shielded)
•
Use the Shielded Twist Pair (STP) LAN cable.
or
Wireless connection
Wireless LAN Adaptor and
Extension cable
•
Connect to the USB 1, 2 or 3 port.
select
access
Connection Test
Manual
Automatically setup is done and the test of the
network connection starts.
(p. 54 - 55)
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
: succeeded
The test is successful and the TV is
connected to the network.
: failed
Check the settings and connections, and
then select [Retry]
Internet
environment
Internet
environment
Access point