Panasonic Viera TH-L42E30G Operating Instructions Manual page 29

R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Reset to Defaults
Gamma
• 1.8 / 2.0 / 2.2
/ 2.4 / 2.6
Reset to Defaults
Motion Picture Pro
• Off
• Mid
• Max
24p Smooth Film
• Off
• Mid
• Max
Film Cadence Detection
• Off
• On
Resolution
Enhancer
• Off
• Mid
• Max
16:9 Overscan
• Off
• On
AV Colour System
• Auto
• PAL
• SECAM
• M.NTSC
• NTSC
Colour Matrix
• SD
• HD
DVI Input Setting
• Normal
• Full
Reset to Defaults
∗ 1 : PC input mode only
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Press the OK button to reset to the default White Balance
Switches the gamma curve
•
Please note the numerical values are reference for the adjustment.
Press the OK button to reset to the default Gamma
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth and clear
•
Depending on the contents, images may be noisy. To prevent the noise,
change the setting.
•
This function is not available for selection (default to [Off]) when
[Viewing Mode] is set to [Game] or in the mode of PC input, photo or
Network service operations.
Automatically compensates the picture frame rate to make the 24p
source movie images smooth
•
This is available only for 24p signal input and displayed instead of
[Motion Picture Pro].
•
This function is not available for selection (default to [Off]) when [Viewing Mode]
is set to [Game] or in the mode of PC input, photo or Network service operations.
Automatically makes the film source movie images clear
Enhances the picture resolution to make the image sharper
•
This function is available for SD (Standard definition) signal.
•
As for HD (High definition) signal, this function is available when aspect
mode is set to [16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or [Zoom].
•
Not valid on VIERA Connect and Media Player
[On]: Default - Image is overscanned by ~5% beyond the edge of the
screen to hide edge video noise
[Off]: Displays image in its original size including edge video noise such
as lines, dashes, dots etc.
•
Applicable for video signals when TV aspect is set to [16:9]
•
Memorised separately for SD and HD channels / signals
Selects optimum colour system based on video signals in AV mode
Available only with 480p or 576p input on video signals in a natural
colour from digital equipment connected to AV1 component or HDMI1 /
HDMI2 / HDMI3 terminals. Select [SD] or [HD] to adjust suitable colour
parameters for [SD] (standard definition) or [HD] (high definition)
•
[SD]: Input signal is a normal TV system
•
[HD]: Input signal is a high definition system
Changes the black level in the image for HDMI input mode with DVI input
signal manually
•
When the DVI input signal from the external equipment, especially from PC,
is displayed, the black level may not be suitable. In this case, select [Full].
•
The black level for HDMI input signal will be adjusted automatically.
•
For HDMI input mode with DVI input signal only
Press the OK button to reset the present Picture Viewing Mode of the
selected input to the default settings
29