Various Functions To Enhance Your Enjoyment - JVC UX-V50GNUB Instructions Manual

Various Functions to Enhance
Your Enjoyment
You can use the following features using the Remote Control.
Frame-by-Frame Playback –––––––––––
Frame-by-Frame playback is possible only when moving pictures
(of the video CDs with or without PBC) are played.
During playback, press the CD #/8 button to pause the
video CD and then press the ¢ button.
Each time you press the ¢ button, the picture advances by one
frame. During Frame-by-Frame playback, no sound will be heard.
You cannot return to the previous frame. (The 4 button is
•
ineffective)
To resume Normal Play, press the CD #/8 button.
Display of Operating Status –––––––––
You can view the current operating status on the TV screen.
Press the ON SCREEN button.
Pressing the above button alternates between on-screen display ON
and OFF. The following screens are shown for 3 seconds.
Display ON
• Once you have turned on the on-screen display, the track
number and playing time are always displayed on the TV
screen. When you play a video CD with PBC, "PBC" will also
be displayed on the TV screen.
16
Display OFF
Viewing the Video Intro of
Video CDs ––––––––––––––––––––––––––––
You can check the contents of a video CD, watching the first 5
seconds of each track on the disc.
1 Play the video CD with or without PBC.
• Load the video CD with or without PBC.
Press the CD #/8 button.
•
2 Press the V.INTRO button after a picture
appears on the TV screen.
The Video Intro Play starts and the first 5-second portions of
the first nine tracks are played in sequence.
1
4
7
• If the video CD has more than nine tracks, the tracks whose
track number is greater than nine will be displayed after the
first nine tracks have been displayed.
To select a track during Video Intro Play, press the VCD
NUMBER UP or DOWN buttons on the Remote Control to select
the track and then press the SELECT button. Continuous play starts
from the selected track. When you use the Unit, press the REV
MODE/VCD NUMBER button and press the 4 or ¢ buttons
to select the track, then press the CD #/8 button.
To stop and cancel the Video Intro Play, press the RETURN
7) button.
(
2 3
5 6
8 9