Table of Contents
Advertisement
Getting Started
Connecting Audio/Video Components
Turn off all the components and the unit before connection.
I About connecting cables/cords
For SCART connections
The SCART cable is not supplied with this unit.
Use the cables supplied with the other components or
purchase them at your dealer.
SCART cable (not supplied)
For audio connections
Connect the external components to this unit with the audio cords.
Use the cord supplied with the other components or purchase them at your dealer.
Digital coaxial cord (not supplied)
A
B
Optical digital cord (not supplied)
C
Audio cord (not supplied)
7
TV connection
For an analogue decoder
To watch or record a scrambled program on your VCR, connect the
analogue decoder to your VCR and select the scrambled channel
on your VCR.
If there is not an appropriate terminal for the decoder on your VCR,
connect the decoder to your TV.
Refer also to the manuals supplied with these equipments.
For recording pictures from STB
When you connect an STB and a VCR directly with a SCART
cable, you can enjoy recording the pictures from the STB onto VCR
without using menu screens of STB. For details, refer also to the
manuals supplied with the STB.
For digital sounds
To enjoy the digital sounds, use both the SCART cable connection
and the digital connection (see page 8).
• When the unit is shipped from the factory, the DIGITAL IN
terminals are set for use with the following components:
– DIGITAL 1 (coaxial): For STB
– DIGITAL 2 (optical): For TV
• If you connect CDR, change the digital input (DIGITAL IN)
terminal setting (see "Digital input (DIGITAL IN) terminals" on
page 25) and the source name (see "Changing the Source
Name" on page 14) correctly.
• Select the digital input mode correctly (see "Selecting the
Analog or Digital Input Mode" on page 13).
If you connect a sound-enhancing device such as a graphic
equalizer between the source components and this unit, the sound
White
output through this unit may be distorted.
Red
Advertisement
Table of Contents
