Operating Jvc's Audio/Video Components; Operating Audio Components - JVC RX-DV3RSL Instructions Manual

Operating JVC's Audio/Video Components

You can operate JVC's audio and video components with this unit's remote control, since control signals for JVC's components are preset in the
remote control.

Operating Audio Components

To operate JVC's audio components using this remote control
• Aim the remote control directly at the remote sensor on the unit.
• To operate a source with the remote control, the source must be
selected using the source selecting buttons on the remote control.
• Refer also to the manuals supplied with your components.
7
Sound control section (Amplifier)
After pressing SOUND, you can perform the following operations:
TV/STB CH
SOUND EFFECT CENTER
1 2 3
ANALOG
TEST REAR·L
/DIGITAL
4 5 6
INPUT
AUDIO SURR ON/OFF REAR·R
7 8 9
SUBTITLE SURR MODE SUBWOOFER
10/0 +10 VFP
100+ TV RETURN
SURR ON/OFF : Turns on or off the Surround modes—
Dolby Digital, DTS Digital Surround, and
Dolby Pro Logic II.
SURR MODE : Selects the Surround modes.
TEST : Turns on or off the test tone output.
CENTER + or – : Adjusts the center speaker channel output
level.
REAR•L + or – : Adjusts the left rear speaker channel
output level.
REAR•R + or – : Adjusts the right rear speaker channel
output level.
SUBWOOFER + or – : Adjusts subwoofer channel output level.
EFFECT : Selects the effect level.
Note:
• After adjusting sounds, press the source selecting button to operate
your target source by using number buttons; otherwise, number
buttons cannot be used for operating your target source.
7
Tuner
You can always perform the following operations:
TV TAPE CDR FM/AM
TV DIRECT
STB VCR DVD
( 9
TV/VIDEO REW/ TUNING /FF
REPEAT SLEEP FM MODE STROBE
TV/STB CH
EFFECT CENTER
SOUND
1 2 3
ANALOG
TEST REAR·L
/DIGITAL
4 5 6
INPUT
SURR ON/OFF REAR·R
AUDIO
7 8 9
SUBTITLE SURR MODE SUBWOOFER
10/0 +10 VFP
100+ TV RETURN
PROGRESSIVE
FM/AM : Tunes into the last selected FM or AM station.
• Each time you press the button, the band changes between FM and
AM alternately.
61
After pressing FM/AM, you can perform the following operations on
a tuner:
1 – 10, +10 : Selects a preset channel number directly.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
TUNING 9 or ( : Tunes into stations.
FM MODE : Changes the FM reception mode.
When FM is selected as the band, you can perform the following
operations for RDS:
MUTING
TV VOL VOLUME
ZOOM
– –
TA/NEWS/INFO
DIGEST TOP MENU MENU
(
PTY PTY SEARCH PTY
CHOICE
ENTER
ON SCREEN RETURN
DISPLAY
DISPLAY
PTY SEARCH/PTY 9 or ( : Searches for PTY codes
TA/NEWS/INFO
7
CD recorder
After pressing CDR, you can perform the following operations on a CD
player and a CD recorder:
TV TAPE CDR FM/AM
TV DIRECT
STB VCR DVD
( 9
TV/VIDEO REW/ TUNING /FF
REPEAT SLEEP FM MODE STROBE
TV/STB CH
EFFECT CENTER
SOUND
1 2 3
ANALOG
TEST REAR·L
/DIGITAL
4 5 6
INPUT
SURR ON/OFF REAR·R
AUDIO
7 8 9
SUBTITLE SURR MODE SUBWOOFER
10/0 +10 VFP
100+ TV RETURN
3
: Starts playing.
4
: Returns to the beginning of the current (or previous)
track.
¢
: Skips to the beginning of the next track.
7
: Stops playing.
8 : Pauses playing. To release it, press 3.
1 – 10, +10 : Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
Note:
• When you start recording on the CD recorder, use the buttons on
the CD recorder itself or on the remote control supplied with it.
9
: Displays the RDS information.
: Selects programs for the Enhanced
Other Network function.