Replacing A Memory Module - Lenovo ThinkCentre 7258 User Manual

Thinkcentre 7258
Hide thumbs Also See for ThinkCentre 7258:
Table of Contents

Advertisement

Replacing a memory module

This section provides instructions on how to remove and replace a memory
module.
1. Open the computer cover. See "Opening the cover" on page 125.
2. Pivot the drive bay assembly upward to access the memory slots. See
3. Remove any parts that might prevent your access to the memory slots.
4. Locate the memory slots.
5. Open the retaining clips.
6. Position the memory module over the memory slot. Make sure that the notch
Attention
Do not open your computer or attempt any repair before reading and understanding the
"Important safety information" in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support
"Accessing system board components and drives" on page 126.
1 on the memory module aligns correctly with the slot key 2 on the system
board. Push the memory module straight down into the slot until the retaining
clips close.
Chapter 9. Replacing FRUs - 607 computers
127

Advertisement

Table of Contents
loading

Table of Contents