Replacing The Microprocessor - Lenovo ThinkCentre 7258 User Manual

Replacing the microprocessor

CAUTION:
The heat sink and microprocessor might be very hot. Turn off the computer and
wait three to five minutes to let the computer cool before opening the computer
cover.
This section provides instructions on how to replace the microprocessor.
To replace the microprocessor:
Attention
Do not open your computer or attempt any repair before reading and understanding the
"Important safety information" in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support
1. Open the computer cover. See "Opening the cover" on page 125.
2. Remove any parts or cables that may prevent your access to the system board.
3. Remove the heat sink and fan assembly. See "Replacing the heat sink and fan
assembly" on page 92.
4. Place the heat sink and fan assembly on its side so that the thermal grease
does not come in contact with anything.
5. Lift the small handle 3 and open the retainer 1 to access the
microprocessor 2 .
Chapter 9. Replacing FRUs - 607 computers
135