Table of Contents
Advertisement
Replacing the memory module
Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page iii.
To replace the memory module, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
2. Remove the computer cover. See "Removing the computer cover" on page 48.
3. Locate the memory module. See "Computer components" on page 5.
4. Open the retaining clips and gently pull the memory module out of the memory slot.
Figure 22. Removing the memory module
5. Insert the notched end
firmly and pivot the memory module until it snaps into place. Make sure that the memory module is
secured in the slot and does not move easily.
Figure 23. Installing the memory module
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 63.
2
of the new memory module into the slot
1
. Press the memory module
.
Chapter 7
Installing or replacing hardware
57
Advertisement
Table of Contents
