Using The Remote Control; Connecting The Fm Antenna - JVC MX-KC4 Instructions Manual

Using the Remote Control

The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m away.
You need to point the Remote Control at the remote sensor on the System's front panel.
CAUTION:
• Make all connections before plugging the System into an AC power outlet.

Connecting the FM Antenna

Using the Supplied Wire Antenna
Using an FM 75-Ohm Antenna Cable (not Supplied)
If reception is poor, connect the outside antenna.
• Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outdoor antenna), disconnect the supplied
FM Wire Antenna.
Remote sensor
Strip vinyl shield from cut
line, twist wire core.
FM wire antenna (supplied)
Extend the supplied FM Wire
Antenna horizontally.
Outdoor FM antenna cable (not supplied)
Getting Started
4