KYMCO PEOPLE 250 Service Manual page 9

1
. GENERAL INFORMATION
n After routing, check that the wire harnesses
are not twisted or kinked.
n Wire harnesses routed along with handlebar
should not be pulled tight, have excessive
slack or interfere with adjacent or
surrounding parts in all steering positions.
n When a testing device is used, make sure to
understand the operating methods
thoroughly and operate according to the
operating instructions.
Do you
understand the
instrument
n Be careful not to drop any parts.
n When rust is found on a terminal, remove
the rust with sand paper or equivalent
before connecting.
Remove
Rust
n Symbols:
The following symbols represent the
servicing methods and cautions included in
this service manual.
: Apply engine oil to the
specified points. (Use
designated engine oil for
Engine Oil
lubrication.)
: Apply grease for lubrication.
Grease
: Transmission Gear Oil (90#)
Gear Oil
Special
: Use special tool.
: Caution
: Warning
PEOPL E 250
1-6