KYMCO PEOPLE 250 Service Manual page 105

8
. DRIVE AND DRIVEN PULLEYS/
V-BELT
INSTALLATION
Install the movable drive face assembly and
drive pulley collar onto the crankshaft.
Lay the drive belt on the driven pulley.
Set the drive belt on the drive pulley collar.
Install the clutch/driven pulley and clutch
outer onto the drive shaft.
Keep grease off the drive shaft.
•
Install washer and the clutch outer nut.
Hold the clutch outer with the universal
holder to tighten clutch outer nut.
Torque: 49.0 58.8kg-m
Special
Universal Holder
Install the drive pulley face, washer and drive
face nut.
Hold the drive pulley with the universal
holder and tighten the drive face nut.
Torque: 88.2 98N-m
Special
Universal Holder
Do not get oil or grease on the
•
drive belt or drive pulley faces.
E017
E017
Movable Drive Face Assembly
Drive Pulley Collar
Drive Belt
Clutch Outer
Drive Pulley Face
PEOPL E 250
Drive Pulley Collar
Driven Pulley and Out
Universal Holder
Universal Holder
8-14