Lincoln Electric IDEALARC DC-600 Operator's Manual page 14

A-6
SEE MACHINE RATING PLATE FOR REQUIRED INPUT SUPPLY VOLTAGE
L3
LINES
L2
INPUT
L1
GND
FIGURE A.7-Reconnect Panel Board Positions for Single Voltage Machines
FIGURE A.8-Reconnect Panel Board Positions for 230/460/575 VAC Machines
INSTALLATION
1. TURN OFF THE INPUT POWER USING THE DISCONNECT SWITCH AT THE FUSE BOX
CRI
W
2. CONNECT TERMINAL MARKED
V
3. CONNECT THE L1, L2, & L3 INPUT SUPPLY LINES TO INPUT SIDE OF THE CRI CONTACTOR AS SHOWN.
CONTACTOR
U
IDEALARC DC-600
TO GROUND PER NATIONAL ELECTRIC CODES.
A-6