E-Sata Board; Removing The E-Sata Board - Toshiba PORTÉGÉ R700 Series Maintenance Manual

4 Replacement Procedures

4.15 E-SATA board

Removing the E-SATA board

To remove the E-SATA board, follow the steps below and refer to Figure 4-25.
1. Remove the following screw and E-SATA board.
• M2×4C
2. Disconnect the E-SATA board FPC from the connector CN9640 on the back of the
E-SATA board. (E-SATA board FPC is fixed to the cover assembly by the double-
sided tapes (D-tape circle).)
CN9640
4-42 [CONFIDENTIAL]
S-THIN HEAD
Figure 4-25 Removing the E-SATA board
×1
Guide
PORTÉGÉ R700 Maintenance Manual (960-833)
4.15 E-SATA board
M2x4C S-THIN HEAD
E-SATA board
E-SATA board FPC