Master Volume; Function Buttons - Pioneer VSX-808RDS Service Manual

VSX-808RDS
% SIGNAL SELECT button
Use to select input signals for the digital components.
First press DVD/LD, TV/SAT, MD/TAPE 1, CD or VCR 1
(+, Function buttons) to select the component, then
press SIGNAL SELECT repeatedly to select one of the
following:
ANALOG : Selects the analog (R and L) audio signals.
DIGITAL : Selects the digital audio signals. This receiver
automatically detects and displays the format of the
signal being input. AC-3 lights when Dolby Digital signals
are input, DTS lights when DTS signals are input, and
MPEG lights when MPEG signals are input. (AC-3 and
DTS decoding is switched automatically.)
• SIGNAL SELECT is fixed in the "ANALOG" position
for components not assigned to one of the four
digital input jacks.
• Because the audio from a karaoke microphone and LD
recorded with analog audio only is not output from the
digital output, set SIGNAL SELECT to "ANALOG".
• This receiver can only play back Dolby Digital, PCM
(32kHz, 44kHz, and 48kHz), DTS, and MPEG digital
signal formats. With digital signal formats other than
these, set SIGNAL SELECT to "ANALOG".
^ DSP MODE button
Press repeatedly to select a DSP sound mode (HALL 1,
HALL 2, JAZZ, DANCE, THEATER 1, or THEATER 2).
Use these modes to produce surround sound from
standard (two channel) stereo sources.
& MIDNIGHT button
Press to hear effective surround sound at low volume
levels. The effect is automatically adjusted according to
the volume level.
* DIGITAL NR button
Switches DIGITAL NR on or off. Use to reduce noise in
digital audio sources.

( MASTER VOLUME

After turning on the desired component, rotate to adjust
the volume.
) PHONES jack
Connect headphones for private listening (the speakers
turn off automatically).
_ STATION/FREQUENCY (+/–) button
STATION: Press to select the preset channel.
FREQUENCY: Press to select the frequency.

+ Function buttons

Selects the function. Each press switches the DVD/LD
input between DVD/LD and DVD 5.1 channel.
¡ TAPE 2 MONITOR button
Switches the TAPE 2 monitor on or off.
™ VIDEO INPUT jacks
Connect a video camera, video game system, etc. to the
VIDEO INPUT jacks.
58