Appendix B - Pinouts For Optional 37 Pin Connector; Figure 13: Optional 37-Pin Numbers; Table 10: Optional 37-Pin Assignments - Quasonix Compact RDMS Installation And Operation Manual

11 Appendix B – Pinouts for Optional 37 Pin Connector
The optional 37-pin connector provides three sets of clock and data, two high-speed analog outputs, and one low-
speed analog output. Pin numbering for the optional connector is shown in Figure 13. Pin assignments are listed in
Table 10.
Position
1 DAC A
2 DAC B
3 RSSI
4 Data C +
5 DNC
6 DNC
7 +28 VDC In
8 Ground
9 Ground
10 Clock A +
11 Data A +
12 Serial Ground
13 Lock Detect
14 Serial TXD
15 Clock C +
16 Clock B +
17 Data B +
18 DNC
19 DNC
37 Quasonix, Inc.

Figure 13: Optional 37-Pin Numbers

Table 10: Optional 37-Pin Assignments

Signal
Analog output (+/- 5VDC)
Analog output (+/- 5VDC)
Received Signal Strength Indication (0-3.3VDC)
Clock and Data pairs
Factory use only – Do Not Connect
Factory use only – Do Not Connect
System power
System power
System power
Clock and Data pairs
Clock and Data pairs
RS232 Serial Connection - Ground
LVTTL Indicator Line
RS232 Serial Connection - Transmit
Clock and Data pairs
Clock and Data pairs
Clock and Data pairs
Factory use only – Do Not Connect
Factory use only – Do Not Connect
TM
Compact RDMS
Description
Telemetry Receiver