Imaging Problems (For Analog Only) - Eizo ColorEdge CX241 User Manual

7-4. Imaging problems (for analog only)

Problem
1. Display position is incorrect.
2. Vertical bars appear on the screen or a
part of the image is flickering.
3. Whole screen is flickering or blurring.
Possible cause and remedy
• Use "Position" in the Setting menu to correct the image
position (see "To correct the screen position" (page
• If the problem persists, use the graphics board's utility if
available to change the display position.
• Use "Clock" in the Setting menu to adjust it (see
eliminate vertical bars" (page
• Use "Phase" in the Setting menu to adjust it (see
remove flickering or blurring" (page
"To
20)).
"To
21)).
Chapter 7 Troubleshooting
21)).
47