6-4. Imaging problems (for analog only)
1. Display position is incorrect.
2. Vertical bars appear on the screen or a
part of the image is flickering.
3. Whole screen is flickering or blurring.
6-5. Other problems
1. The <Smoothing> icon on the Adjustment
menu <Screen> cannot be selected.
2. The adjustment menu does not appear.
3. No mode name is displayed.
4. The auto adjustment function does not
work.
5. No audio output.
38
Chapter6Troubleshooting
Problem
Problem
Possible cause and remedy
• Use<Position>intheAdjustmentmenutocorrectthe
imageposition(see"Tocorrectthescreenposition"
(page17)).
• Iftheproblempersists,usethegraphicsboard'sutility
ifavailabletochangethedisplayposition.
• Use<Clock>intheAdjustmentmenutoadjustit(see
"Toeliminateverticalbars"(page16)).
• Use<Phase>intheAdjustmentmenutoadjustit(see
"Toremoveflickeringorblurring"(page17)).
Possible cause and remedy
• Youcannotchoosethesmoothingiconwhenthe
screenisdisplayedinthefollowingresolutionsor
settings.
- Theresolutionis1920×1080
- "Normal"isselectedfrom<ScreenSize>inthe
Adjustmentmenu.
• Checkwhethertheoperationlockfunctionworks(see
"3-4.LockingButtons"(page28)).
• CheckthattheAdjustmentmenuisnotactive.
• Thisfunctiondoesnotworkduringdigitalsignalinput.
• ThisfunctionisintendedforuseontheMacintosh
andonAT-compatiblePCrunningWindows.Itdoes
notworkproperlywhenanimageisdisplayedonly
onapartofthescreen(commandpromptwindow,for
example)orwhenablackbackground(wallpaper,etc.)
isinuse.
• Thisfunctiondoesnotworkcorrectlywithsome
graphicsboards.
• Checkwhetherthestereominijackcableisconnected
properly.
• Checkwhethervolumeissetto0.
• Checkthecurrentexternaldeviceandaudioplayback
softwaretoseewhethertheyareconfiguredcorrectly.
• IfHDMIinputisused,checkthecurrentexternal
deviceandthe<Source>settingintheAdjustment
menu(see"3-2.SwitchingsoundsourceforHDMI
signalinput"(page27)).