Table of Contents
Advertisement
3-5. Changing DUE (Digital Uniformity Equalizer)
Setting
This product is equipped with a Digital Uniformity Equalizer function that reduces display unevenness. This DUE
setting can be changed.
Settings
Brightness
Prioritizes high brightness and high contrast ratio.
Uniformity
Prioritizes reduction of display unevenness.
Attention
• To change the DUE setting, the adjusted monitor display must be readjusted. Perform the target adjustment again using
ColorNavigator or ColorNavigator Elements. For details, refer to the ColorNavigator or ColorNavigator Elements User's
Manual (on the CD-ROM).
Procedure
1. Press
to turn off the monitor.
2. Holding
The "Optional Settings" menu appears.
3. Choose "DUE Priority" from "Optional Settings", and press
4. Select "Uniformity" or "Brightness" with
5. Select "Finish" with
6. Press
.
3-6. Setting Signal Bandwidth
The range of frequency and detection sensitivity of the change in signal can be switched.
Attention
• This function cannot be used with HDMI input.
Procedure
1. Press
to turn off the monitor.
2. Holding
The "Optional Settings" menu appears.
3. Choose "Signal Selection" from "Optional Settings", and press
4. Choose the input signal to set with
5. Choose "Signal Bandwidth", and press
6. Select "Normal", "Wide-1" or "Wide-2" with
7. Select "Finish" with
8. Press
.
down, press
for at least two seconds to turn on the monitor.
or .
down, press
for at least two seconds to turn on the monitor.
or , and press
or .
Function
.
or , and press
.
.
.
or , and press
.
.
Chapter 3 Setting Monitor
35
Advertisement
Table of Contents
