Table of Contents
Advertisement
!
Digital audio component
E A M
Protective cap
/ S T R
P C M
C A L
O P T I
D V D
U T
A L O
D I G I T
• Set "DIGITAL AUDIO OUTPUT" in the "AUDIO" menu
correctly according to the connected digital audio
equipment (see page 30). If setting is incorrect, loud noise
may be generated causing damage to the speakers.
⁄
To connect the powered subwoofer
From the powered
subwoofer
(not supplied)
@
Speakers
• When connecting the speaker cords, match the polarity of
the speaker terminals: red color to (+) and black color to (–).
From right
speaker
• DO NOT connect more than one speaker to
each terminal.
• DO NOT push or pull the speakers as this
will damage the foot spacers at the bottom
of the speakers.
SUB-
WOOFER
OUT
Red
From left
Black
speaker
When connecting auxiliary equipment (AUX)
Stereo mini plug
Preparing the remote control
R6(SUM-3)/AA(15F)
• Dispose of batteries in the proper manner, according to
federal, state, and local regulations.
DO NOT recharge, short, disassemble or
heat the battery or dispose of it in a fire.
When using the remote control
Point the top of the remote control toward the remote sensor
as directly as possible. If you operate it from a diagonal
position, the operating range (approx. 5 m) may be shorter.
(not supplied)
5
Advertisement
Table of Contents
