Table of Contents
Advertisement
Also available, is an optional bucket seat with flip-up
bolster. By simply flipping up the bolster the driver is
able to sit higher in the seat. This is designed to give
the driver greater flexibility, increased visibility, and riding
comfort.
1. 234 Candia Starboard Bucket Operation
To rotate the the starboard (driver's) bucket seat to face
aft:
1. Place the tilt wheel in its most upward position by
depressing the release lever (adjusting tab) with your
thumb. Be sure to hold the top of the wheel to assist
in positioning. Release the lever once the steering
wheel is in its most upward position.
2. Locate the lever on the left side of the slider mecha-
nism and pull to release the pin from the pedestal.
This will allow you to rotate the seat. See Figure
N6.
3. Rotate the bucket seat counterclockwise (inboard)
o
180
. In addition, DO NOT USE FORCE to rotate
the chair.
NOTICE
When rotating the driver's side (starboard)
bucket, damage to seat, steering wheel, and/
or coaming pad may result if attempting to ro-
tate in the wrong direction, with the steering
wheel not tilted up, and/or over-rotating. DO
NOT USE FORCE to rotate the chair.
To return the starboard (driver's) bucket seat to the bow
facing position:
1. Rotate the bucket seat clockwise (outboard) 180
until the seat mechanism locks into place. In addi-
tion, DO NOT USE FORCE to rotate the chair.
NOTICE
When rotating the driver's side (starboard)
bucket, damage to seat, steering wheel, and/
or coaming pad may result if attempting to ro-
tate in the wrong direction, or with the steering
wheel not tilted up, and/or over-rotating. DO
NOT USE FORCE to rotate the chair.
2. Position the seat according to the needs of the
driver by lifting up on the release handle under the
middle of the seat. See Figure N6.
Candia FS Owner's Manual
03/00
3. Tilt the steering wheel to the desired position using
the tilt lever knob on the steering column.
2. 254 Candia Starboard Bucket Operation
To rotate the starboard (driver's) bucket seat to face to
the aft:
1. Place the tilt wheel in its most upward position by
depressing the release lever (adjusting tab) with your
thumb. Be sure to hold the top of the wheel to assist
in positioning. Release the lever once the steering
wheel is in its most upward position.
2. Slide the seat completely forward by lifting up on
the release handle under the middle of the seat.
See Figure N6.
3. Locate the lever on the left side of the slider mecha-
nism and pull to release the pin from the pedestal.
This will allow you to rotate the seat. See Figure
N6.
4. Rotate the bucket seat counterclockwise (inboard)
until it faces the aft position. In addition, DO NOT
USE FORCE to rotate the chair.
When rotating the driver's side (starboard)
bucket, damage to seat, steering wheel, and/
or coaming pad may result if attempting to ro-
tate in the wrong direction, or with the steering
wheel not tilted up, or over-rotating, and/or with
the seat not fully forward. DO NOT USE
FORCE to rotate the chair.
To return the starboard (driver's) bucket seat to the bow
o
facing position:
1. Rotate the bucket seat clockwise (outboard) 180
until the seat mechanism locks into place. In addi-
tion, DO NOT USE FORCE to rotate the chair.
When rotating the driver's side (starboard)
bucket, damage to seat, steering wheel, and/
or coaming pad may result if attempting to ro-
tate in the wrong direction, or with the steering
wheel not tilted up, or over-rotating, and/or with
the seat not fully forward. DO NOT USE
FORCE to rotate the chair.
NOTICE
NOTICE
Section N
Page 3
o
Advertisement
Table of Contents
