Initializing Using The Machine's Operation Panel - Canon PIXMA MP620 Series Getting Started

flhJ:" • ',;
%ll\*
» ' , ,
RtltorjlJS
the Machine to the Factory Settings
o
Select Yes and press the OK button.
Do you want to restore
LAN setting. to the
factory settings?
1 Initializing using the machine's Operation Panel
Ve.
No
Follow these steps to restore the machine's network settings to factory defaults,
o
Open the Operation Panel on the machine, use the Easy-Scroll
Wheel or the
-4
or • button to select Settings, then press the
OK button.
iRemaining ink voill Introduction
(j) Confirm that the right screen appears.
After a while, the LAN settings screen returns.
• The machine's network settings are restored to factory defaults.
Following i. completed.
Reset LAN SIttings
e
Select Device settings and press the OK button.
€) Select LAN settings and press the OK button,
o
Select Reset LAN settings and press the OK button.
" Setting.
'.
I~I
.,JJJ
Device setting. 2/3
Perform various .etting•.
\/- Device settings
Plain paper feed setting.
Print .etting.
LAN settings
AdVance,f.ettings----
Mobile phone print .etting
PictBridga print .etting. ---
Limguige sil8ctiOoi - - _. - .
--_.--,.-----
.,'~ LAN .ettings
Change wireless/wired
Wireless LAN settings
Wirele.s LAN setting list
Wired LAN .etting ~st
IPv4/IPv6 setting'
WSD setting
Reset LAN settings
• Factory Default
Active
BJNPSETUP
Disable
IPaddress: 192.168.1.123 (default)
• Subnet mask: 255.255.255.0
• Default gateway: 0.0.0.0
Inactive
• IPaddress: 192.168.1.123 (default)
• Subnet mask: 255.255.255.0
• Default ateway: 0.0.0.0
7