Canon PIXMA MP620 Series Getting Started page 22

Next, read "12 Information" on page 29!
~
USB
To change the port name, click View Setup Results, then click Set Port
Name. For details, refer to "8 Changing the port name" in the printed
manual: Network Setup Troubleshooting .
• If Unsafe Removal of Device is displayed, click OK.
When the Setup Completion dialog box appears, remove the USB
cable, then click Finish.
~
...
~ . . ~ol<t_ • .-..~.Iho~
s-:.....-...
..:'**p;'*.!
• If the error message appears, refer to "5 The following screen is displayed
during setup" in the printed manual: Network Setup Troubleshooting.
When the Network Setup of the Card Slot dialog box appears, specify
the drive letter, then click Next.
o
Windows XP/2000
~
...