xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
To view the global PPPoE ID insertion state:
DES-3200-28F:4# show pppoe circuit_id_insertion
Command: show pppoe circuit_id_insertion
Status: Disabled
DES-3200-28F:4#
show pppoe circuit_id_insertion ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To view PPPoE circuit ID configuration for ports 2 to 5:
DES-3200-28F:4# show pppoe circuit_id_insertion ports 2-5
Command: show pppoe circuit_id_insertion ports 2-5
Port
State
----
---------
2
Disabled
3
Enabled
4
Disabled
5
Enabled
DES-3200-28F:4#
Used to display the PPPoE ID insertion configuration on a per port basis.
show pppoe circuit_id_insertion ports {<portlist>}
This command allows the user to view the configuration of PPPoE ID insertion for
each port.
<portlist> - Specifies which ports to display. If no ports are specified, all ports
configuration will be listed.
None.
Circucit ID
---------------------------------------------
Switch MAC
UDF String (D_Link-DES30xxpD-Link_DES-XXXX)
Switch IP
Switch MAC
514