D-Link xStack DES-3200 Series Reference Manual page 226

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
create cpu access_profile
address.
profile_id <value 1-3>  Enter an integer between 1 and 3 that is used to identify the CPU access
profile to be created with this command.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To create a CPU access profile:
DES-3200-28:4# create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code
Command: create cpu access_profile profile_id 1 ip vlan source_ip_mask 20.0.0.0
destination_ip_mask 10.0.0.0 dscp icmp type code
Success.
DES-3200-28:4#
delete cpu access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the CPU access profile with a profile ID of 1:
DES-3200-28:4#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DES-3200-28:4#
config cpu access_profile
Purpose Used to configure a CPU access profile used for CPU Interface Filtering and to define
specific values that will be used to by the Switch to determine if a given packet should be
forwarded or filtered. Masks entered using the create cpu access_profile command will be
combined, using a logical AND operational method, with the values the Switch finds in the
specified frame header fields. Specific values for the rules are entered using the config
cpu access_profile command, below.
Syntax config cpu access_profile profile_id <value 1-3> [add access_id <value 1-5>[ethernet {vlan
Used to delete a previously created CPU access profile.
delete cpu access_profile profile_id <value 1-3>
This command is used to delete a previously created CPU access profile.
profile_id <value 1-3>  Enter an integer between 1 and 3 that is used to identify
the CPU access profile to be deleted with this command. This value is assigned to
the access profile when it is created with the create cpu access_profile command.
Only Administrator-level users can issue this command.
221