Single Line Telephone Adaptor - Panasonic DBS 40 Manual

Chapter 5. Peripheral Equipment

Single Line Telephone Adaptor

Guidelines
l
. Each SLT extension requires a digital extension port connection to the
1. Remove the cover from the SLTA.
2. Remove the cable punch-out plate (Figure 5-20) to make an opening for
Figure S-20. Cable punck-ou d&e. SLTA
3.
5-34
The Single Line Telephone Adaptor (SLTA. VB-43709) provides an
alternative way of connecting analog DTMF telephones (2500 sets). One
SLTA supports up to 4 Single Line Telephones.
SLTA.
the cables coming into the SLTA.
To remove the plate, cut the grooves on either side with diagonal cutters.
Then
bend the plate back and forth with needle-nose pliers to remove it.
Mount the
SLTA to the wall (see Figure 5-21).
Note: Table 5-l I shows the maximum distance the SLTA can be located
from the DBS.
DBS Manual - Issued 8/l/95
Section 3004nstallatlon
DBS-70-300