Panasonic DBS 40 Manual page 113

Table S-IO. Switch settings
3. Remove the cable punch-out plate (Figure 5-12) to make an opening for
Figure 5-12. Cable punch-out plate, Voice Announce Unit
4. Mount the VAU on the wall using the three screws provided with the unit.
5. Connect the extension cable from the DBS to CNl on the VAU.
5-24
for
abbreviated dialing digit length, VAU
Switch Block 2 (SW2)
Abbreviated Dialing Digit Length (Switches 7-8)
Switch
7
8
the cable coming into the VAU.
To remove the plate, cut the grooves on either side with diagonal shears.
Then bend the plate back and forth with needle-nose pliers to remove it.
able Punch-Ot
late
(See Figure 5- 14.)
Note: The two inside pins on CNl are port 1. The two pins on either side
are port 2, as shown in Figure 5-13.
DBS Manual - Issued 8/l/95
Number of Digits
1 Digit 2 Digits
OFF OFF
OFF ON
3 Digits
ON
OFF
DBS-70-300