Usage Of The Operation Knobs - Haier HLP21N Service Manual

Service Manual
Model No: HLP21N
4-6 USAGE OF THE WATER LEVEL BUTTON
HIGH
MEDIUM
LOW
Indicator mode and meaning
The indicator is off, indicating that the
program or mode is not selected.
The indicator is flashing, indicating the
running program.
The indicator is on, indicating the program
or mode selected and about to run.
The indicator is flashing rapidly, indicating
abnormal phenomenon.
WATER
LEVEL
HIGH
MEDIUM
LOW
"CYCLE" button
Push this button to select one or more programs from the five procedures:
heavy wash,quick wash,wash, rinse, spin.
If you push the "CYCLE" button for 7 times, it will resume.
Times of pushing the Contents (the lighted indicators
" CYCLE" button indicate the programs about to run)
Quick wash Heavy
Switch on the power
Quick wash Heavy
1
Quick wash
2
Quick wash Heavy
3
Quick wash Heavy
4
Quick wash Heavy
5
Quick wash Heavy
6
Description:
Push the "power switch" button to switch on the power. If the "start/pause" button is not pushed in 10 minutes, the washing machine will
switch off the power automatically.
In using, first push the "power switch" button, then push the "CYCLE" button to select program. After selection, push the "Start/Pause"
button to start washing.
WATER
LEVEL
CYCLE
HEAVY
QUICK WASH
Selected procedure
program
Wash rinse spin Wash, rinse, spin
(Normal program)
Wash rinse spin
Heavy wash,
rinse, spin
Heavy Wash rinse spin
Quick wash,
rinse, spin
Wash rinse spin
Wash only
Wash rinse spin
Wash and rinse only
Wash rinse spin
Rinse and spin only
Wash rinse spin
Spin only
"Water level"button
Select suitable water level among three
water levels of "High" "Medium" "Low"
according to the quantity of the laundries
After water inlet as per the preset water level,
if more water is needed, please press the
button to needed water level.
"Power on/off" button
Push the button once to switch on/off the power.
When the power is switched on, the "NORMAL"
indicator is on.
To switch on the power again after the power is
switched off, please wait for at least 3 second
before switch the power on.
The power will be switched off automatically
after the washing is finished.
STAT US
NORMAL
SPIN
RINSE
WASH
"Start/Pause" button
Push this button to perform automatic
"NORMAL" program when the machine is
started.
To start operating, push this button.
In operating, push the button to pause
the operating. Push it again to resume
operating.
Remarks: in pausing, the flashing
Remarks:
Once the "Start/Pause" button is pushed, you can
only select at midway during "HEAVY" and
"wash" procedure; if you need to select at midway
during procedures other than "HEAVY" and
"wash", you have to switch off the power for more
than 3 second before switch on the power again and
make new selection.
(Drain) The draining can only be performed
according to the stipulated time when there's water
in the tub. If there's no water in the tub, it will only
perform 10 second draining action, then enter next
step.
-11-
Issue
Rev.
POWER
ON/OFF
HLP21N
START
PAUSE