Denon S-302 Owner's Manual page 42

ENGLISH
Advanced Operation
<~> <~> <~>
r;;:-:~
__
~tl
~r~
-IU
ON/STANDBY <FUNCTION> VOLUME
Press
[MUTE].
Turning the Sound Off Temporarily
(Muting)
BASS
Other Functions
Adjusts the bass sound (-10 dB to
+
10 dB).
TREBLE
Adjusts the treble sound (-10 dB to + 10 dB).
DEFEAT
1
Select the adjustment mode using
[TONE].
C
BASS - - - TREBLE - - - DEFEAT
~
[Selectable model
If no operation is performed within 4 seconds, the display switches
back to what was previously displayed.
2
With the name of the item to be adjusted selected,
press [<] [>] to adjust the level.
The tone adjustment circuitry can be bypassed to achieve high sound
quality. "OdB"
To cancel, either press [MUTE] again or adjust the volume using
VOLUME.
I
Adjusting the Tone
*
After about 4 seconds, the "SLEEP" indicator stops flashing,
remaining lit, and the settings are automatically entered.
1
Set the current time (a2Fpage 22).
Setting the Sleep Timer
Use this function to automatically sWitch the power to the
standby mode after a specific amount of time (minutes).
I§.Y.U:
"SETUP" - "TIMER" -
"SetTime" (n2Fpage 22)
Canceling the sleep timer
Press [SLEEP] until the" SLEEP" indicator turns off.
*
The sleep timer can also be canceled by setting the S-302's power
to the standby mode using ON/STANDBY.
Checking the time remaining until the sleep timer
starts
In the stop mode, press [STATUS].
The time is displayed.
*
The time can be displayed by pressing [STATUS] when the power is
in the standby mode. (When this is done, the set is no longer in the
low power consumption standby mode.)
When pressed twice while the time is displayed, the display turns
off and the set is put back in the low power consumption standby
mode.
If the sleep timer and everyday timer settings overlap, the sleep
timer has priority.
3
The power is set to the standby mode after the set
amount of time.
2
During playback, use
[SLEEP]
to select the time.
The 'SLEEP' indicator flashes.
r
120 -90-60- 50 -40 -30 -20 -10-,
'------"SLEEP"indicator off
_.----~--l
".~~[STATUS]
"0
G+-ITONEI
til"
r.,
~
I
>:'<.mmi[<ll>l
---------~--[SLEEPI
(~)
VOLUME
I
hJ
[MUTE]
~"6)
[<ll>
]~<::=::>
\<. . . . .
<~/
O_/SlAN05"!
ON/STANDBV---;.----<[]
I
About the button names in these explanations
<
> :
Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
38