Tuning In To A Preset Station; Receiving Fm Stations With Rds - JVC CA-UXHB4 Instructions Manual

4
To preset more stations, repeat steps 1 to 3
above, allocating a different preset number to
each station.
• Storing a new station on an already assigned number
erases the previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will remain in the unit.

Tuning in to a Preset Station

On the remote control ONLY:
1
Press FM/AM/DAB to select either
"FM" or "AM (MW)."
The unit automatically turns on and tunes in to
the previously received station.
2
Press PRESET GROUP
PRESET GROUP
to select a preset number.
To tune in to a preset station directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you
to select the preset number you want.
Ex.: For preset number 5, press 5.
For preset number 15, press +10, then
press 5.
For preset number 20, press +10
twice, then press 0.
FM/AM/DAB
UP
or
SEARCH/
SCROLL
PRESET
DOWN
GROUP
repeatedly
/
SELECT
DOWN
PRESET
GROUP
1 2
4 5
7 8
0

Receiving FM Stations with RDS

RDS (Radio Data System) allows FM stations to send an
additional signal along with their regular program signals.
For example, the stations send their station names, as well as
information about what type of program they broadcast, such
as sports or music, etc.
With the unit, you can receive the following types of RDS
signals.
Radio Text:
Text messages sent from the station
Program Type:
Types of broadcast programs.
RDS Time:
Time and day of the week sent from the station
PI (Program Identification) Code:
Identification number of a program.
More about RDS
SEARCH/
SCROLL
UP
• Some FM stations do not provide RDS signals.
• RDS services vary among FM RDS stations. For details on RDS
services in your area, check with local radio stations.
• RDS may not work correctly if the received station is not
transmitting the signals properly or if the signal strength is weak.
3
6
9
+10
Continued
22