Tuning In To A Station; Presetting Stations; Tuning In To A Preset Station - JVC CA-UXHB4 Instructions Manual

4
Press SEARCH/SCROLL UP
or SEARCH/SCROLL DOWN
to select a station.
• Each time you press the button, the station
changes step by step.
5
Press SELECT.
Signal reception indicator and the
current signal strength level appear (filled
blocks across from left to right).
Signal reception indicator
• If the signal strength level does not reach to the signal
reception indicator, you cannot listen to the station well.
In this case, adjust the position of the antenna.
6
Press SELECT again.
A station is tuned in.
Station name Channel and frequency
Information sent from the station (Ex. program type)
• For the description of information sent from the station,
see page 20.

Tuning in to a Station

1
Press SEARCH/SCROLL UP
or SEARCH/SCROLL DOWN
to select a station.
The list of the station appears.
2
Press SELECT to tune in to the
selected station.
• The unit does not tune in to the station
until you press SELECT.

Presetting Stations

You can preset 10 DAB stations manually.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step 2 .
UP
SEARCH/ SEARCH/
SCROLL SCROLL
PRESET
DOWN UP
GROUP
/
SELECT
DOWN
PRESET
GROUP
UP
SEARCH/ SEARCH/
SCROLL SCROLL
PRESET
DOWN UP
GROUP
/
SELECT
DOWN
PRESET
GROUP
Signal strength level
UP
SEARCH/ SEARCH/
SCROLL SCROLL
PRESET
DOWN UP
GROUP
/
SELECT
DOWN
PRESET
GROUP
UP
SEARCH/ SEARCH/
SCROLL SCROLL
PRESET
DOWN UP
GROUP
/
SELECT
DOWN
PRESET
GROUP
UP
SEARCH/ SEARCH/
SCROLL SCROLL
PRESET
DOWN UP
GROUP
/
SELECT
DOWN
PRESET
GROUP
On the remote control ONLY:
1
Tune in to the station you want to preset.
2
Press PROGRAM.
An available preset number starts flashing on the
display.
3
Press PRESET GROUP
PRESET GROUP
preset number, then press
PROGRAM.
The preset station is stored in memory.
4
To preset more stations, repeat steps 1 to 3
above, allocating a different preset number to
each station.
• Storing a new station on an already assigned number
erases the previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will remain in the unit.

Tuning in to a Preset Station

On the remote control ONLY:
1
Press FM/AM/DAB to select "DAB."
The unit automatically turns on and tunes in to
the previously received DAB station.
2
Press PRESET GROUP
PRESET GROUP
to select a preset number.
To tune in to a preset station directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you
to select the preset number you want.
Ex.: For preset number 5, press 5.
For preset number 10, press +10,
then press 0.
When you press a number with no preset station
"Empty Preset" appears on the display.
Continued
PROGRAM
UP
or SEARCH/
SCROLL
PRESET
DOWN
GROUP
to select a
/
SELECT
DOWN
PRESET
GROUP
PROGRAM
FM/AM/DAB
or
UP
SEARCH/
SCROLL
PRESET
DOWN
GROUP
repeatedly
/
SELECT
DOWN
PRESET
GROUP
1 2
4 5
7 8
0
SEARCH/
SCROLL
UP
SEARCH/
SCROLL
UP
3
6
9
+10
18