Using The Radio; To Select The Am Tuner Interval Spacing; Tuning In Radio Stations; Auto Preset - JVC UX-LS3 Instructions Manual

Using the radio

To select the AM tuner interval spacing

Some countries or regions space AM stations 9 kHz
apart, and others use 10 kHz spacing.
Before operating the tuner, select the appropriate AM
tuner interval spacing used in your residential area.
On the main unit only:
When AM waveband is selected, press and hold
STOP 7.
Each time you press and hold, you can select "9K
–> 10K" or "10K –> 9K".

Tuning in radio stations

1
Press TUNER BAND button to select the desired
waveband: FM or AM.
2
Press and hold 4 or ¢ button to tune in to
the desired frequency.
⁄
• To tune to a weak station, briefly press 4 or ¢ button
repeatedly until the display shows the desired frequency or
when the best reception has been obtained.
STEREO/MONO
Press the STEREO/MONO button to select mono or
stereo mode.
When stereo mode is selected, the icon "STEREO"
appears on the display (if current station is FM
stereo).
⁄
• You are able to select stereo or mono mode in FM band only.

Auto preset

Radio stations can be preset automatically in preset
channels.
1
Press TUNER BAND button to select the desired
waveband: FM or AM.
2
Press MEMORY/REPEAT button for more than 2
seconds.
The receivable radio stations are preset
automatically.
When the Auto preset operation has completed,
the unit enters the condition in which preset
station P01 is tuned.
16

Manual preset

You can store up to 30 for FM and 10 for AM radio
stations in the memory. When a preset radio stations
selected, the preset number appears on the display.
1
Press TUNER BAND button to select the desired
waveband: FM or AM.
2
Press 4 or ¢ button to tune in to the
desired frequency.
3
Press MEMORY/REPEAT button so that "P – –"
appears on the display.
4
If you want to store the radio station to another
preset number, press FOLDER/P.CALL A or B,
or digit buttons 0–9 to select the desired preset
number.
5
Press ENTER button again to store the radio
station.
6
Repeat steps 2 to 5 to store other preset radio
stations.
⁄
• During preset, if no button is pressed within 20 seconds, the
system will exit preset mode automatically.

Tuning to a preset radio station

Press FOLDER/P.CALL A or B, or digit buttons 0–9
to select the desired preset number.
The preset number and radio frequency appear on
the display.
⁄
• Press the digit buttons as shown below:
FM
To select 1 1 and ENTER
To select 2 2 and ENTER
To select 10 1, 0 and ENTER
AM
1 and ENTER
2 and ENTER
1, 0 and ENTER