Panasonic CY-VHD9500U Operating Instructions Manual page 45

E
Troubleshooting
N
G
L
I
S
Error Display Messages
H
(continued)
SD card
49
Display Possible cause
No card is in the main unit.
NO CARD
Data the unit can play is not
recorded on the card.
NO FILE
The wrong mode has been selected
(example: the MPEG4 mode has
been selected even though Still
pictures are to be played).
You are trying to play incompatible
x
or corrupted data. This data cannot
be played.
An SD card whose data cannot
be played by this unit has been
inserted in.
CHECK CARD
SD card data loading failed.
What to do if the product does not operate no matter which button you press
92
CY-VHD9500U
(continued)
Possible solution
Insert the SD CARD into the SD card
slot.
Check the SD card. For details, refer to
"Notes on SD Cards" (page 66).
Be absolutely sure to use SD-Jukebox
to create music fi les.
Check whether the proper mode to be
played has been selected.
Check the SD card.
Check the SD card.
Remove the SD card, and then insert it
in again.
Reset switch
Press this switch with a tough pointed object.
IMPORTANT
Press this switch when any operation buttons
do not work. If the product does not become
restrored even after pressing the switch, call the
nearest Panasonic Servicenter and ask for repairs.
Maintenance
Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry and soft cloth for
routine exterior cleaning. Never use benzine, thinner or other solvents.
Product Servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest
authorized Panasonic Servicenter. The product should be serviced only by a qualifi ed technician.
Fuse
Use fuses of the same specifi ed rating (3 A). Using different substitutes or fuses with higher ratings, or
connecting the unit directly without a fuse, could cause fi re or damage to the unit.
If the replacement fuse fails, contact your nearest Panasonic Servicenter for service.
E
N
G
L
I
S
H
50
93
CY-VHD9500U