Panasonic CY-VHD9500U Operating Instructions Manual page 44

E
Troubleshooting
N
G
L
I
S
VCR, Camcorder, etc.
H
47 Problem Possible cause
The picture from a A VCR or Camcorder is not
VCR or a camcorder is connected correctly.
not displayed.
Display settings
Problem Possible cause
The picture is dark. The screen is not adjusted
The picture is whitish. properly.
Something is wrong
with the picture.
The picture is light in
color.
Red, blue, or green This is a characteristic of liquid
spots appears. crystal panels.
Remote Control Unit
Problem Possible cause
No response to The battery is inserted in the
pressing buttons wrong direction. A wrong battery is
inserted.
The lithium battery is weak.
The aiming direction of the remote
control unit is wrong.
The sensor is exposed to direct
sunlight. (The remote control
unit may not be operable when
the sensor is exposed to direct
sunlight. In such a case, the
system is not faulty.)
90
CY-VHD9500U
(continued)
Possible solution
Connect a VCR or Camcorder correctly.
Possible solution
Make every adjustment of the screen.
This is not a problem (page 10).
Possible solution
Insert a correct battery in the correct
direction.
Replace the battery with new one.
Aim the remote control unit at the
sensor of the unit and press buttons.
Block off sunlight to the sensor.
Error Display Messages
DVD video/Video CD/CD/MP3
Display Possible cause
Disc is dirty, scratched or upside
down.
Playback Error
A CD that has data other than
CD-DA or MP3 type is loaded.
Please eject.
An attempt was made to play a PAL
disc.
Disc is dirty, scratched or upside
down.
A CD that has data other than
CD-DA or MP3 type is loaded.
This type of disc
An attempt was made to play a PAL
cannot be played.
disc.
Please eject.
The unit for some reason cannot
read the fi le you are trying to play.
(File recorded in an unsupported
fi le system, compression scheme,
data format, fi le name extension,
damaged data, etc.)
The unit will not operate for some
reason.
Mechanical Error
Please eject.
An attempt was made to play a disc
This disc may not
with a region number that was not
be played in your
"1" or "ALL".
region.
Please eject.
E
N
G
L
I
S
H
48
Possible solution
Check the disc.
Check the disc.
Eject the disc.
Check the disc.
Check the disc.
Eject the disc.
Select a fi le that the unit can read.
Confi rm the type of data recorded
on the disc. Create a new disc if
necessary.
Eject the disc. If the disc does not
eject when you press [<], then press
the reset switch (page 92). If normal
operation is not restored, call the store
where you purchased the unit or the
nearest Panasonic Servicenter.
Eject the disc.
91
CY-VHD9500U