Assigning Titles To An Md - JVC CA-MXS5RMD Instructions Manual

Assigning Titles to an MD

You can assign a name to each MD and to each track.
Once a title is assigned, it is displayed for your
confirmation.
Each title can be composed of up to 64 characters, and can
be input using alphabetic characters (uppercase and
lowercase), symbols and numerals.
On the unit:
In the following example, the process is explained from the
very first — that is, inserting a disc. If you already start
recording or playing, start from step 2.
• To exit from the title entry screen any time during the
process, press TITLE.
1
Insert an MD you want to edit into the MD loading
slot.
2
Press TITLE.
The source is changed to "MD," and the MD recorder
enters one of the following title entry screen.
• Disc title entry screen: appears when you press
TITLE when the MD recorder stops.
• Track title entry screen: appears when you press
TITLE while playing or recording.
Ex. While playing track 1
3
Push the joy control rightward (¢ ) or leftward
(4 ) to change the title entry mode.
• Title entry mode changes as follows:
Disc
title
Last track
title
4
Press SET to enter the selected title entry mode.
Ex. When entering a disc title
5
Press CHARACTER to select the character set you
want.
• Each time you press the button, the character sets
change as follows:
Alphabets
Alphabets
Numerals and symbols
– 45 –
2nd track
1st track
title
title
3rd track
title
Numerals
& Symbols